Valor VOGUE 1345RGP Instructions D’installation

1345RGP Refl ective Glass Panel
for use with the Valor 1300 Vogue fi replace only
The Refl ective Glass Panel 1345RGP is designed to enhance the
appearance of the fl ames and is intended to be installed on the Valor
Vogue 1300 fi replaces fi tted with the ceramic black fl uted liners.
Installation
When installing the appliance. After installing the ceramic
panels:
1. Place the glass retainer aligning it to the two big holes
between the burner and the back of the fi rebox.
2. Position the cast platform in the fi rebox aligning its two rear
feet with the two holes in the glass retainer. The weight of the
platform will maintain the glass retainer in place.
3. Slide the glass panel between the rear of the cast platform
and the glass retainer. Center the glass in the fi rebox.
4. Install the rock base, rocks, twigs and window as indicated in
the appliance installation manual.
When retrofi tting the appliance.
1. Remove window.
2. Remove twigs, rocks, rock base and the cast platform.
3. Follow the steps 1 through 4 listed above.
Description Part Number
1 Glass retainer 4001963
2 Glass panel 4001898
1
2
4001967-01
© Copyright Miles Industries Ltd. 2008. All rights reserved.
V
OGUE
Installation Instructions
Cast
platform
Front
Cast
platform
feet
Cross section right side view
Designed and Manufactured by / for
Miles Industries Ltd.
North Vancouver B.C, CANADA. V7H 3B1
www.valorfi replaces.com
Glass
Back
Glass
retainer
1