Sony BTA-NW1A Mode D'emploi page 9

Preparing the unit
x Using the supplied AC power adaptor
Connect the AC power adaptor to the DC IN jack on the unit and a wall outlet (mains).
AC power adaptor
AC-PT1
To a wall
outlet
(mains)
To a wall
outlet
(mains)
Notes
•The socket outlet should be as close as possible to the unit and easily accessible.
•The shape of your AC power adaptor differs depending on your area.
x Installing the size AA alkaline dry batteries
The batteries are convenient for outdoor use of the unit.
1
(1) Remove the battery cover by sliding the cover in the direction of the arrow.
(2) Insert two size AA alkaline dry batteries with the correct 3 and # polarity
into the battery compartment and with the ribbon under the batteries.
(3) Replace the cover.
Note
We recommend that you use Sony size AA alkaline dry batteries.
zTip
The DC IN jack has source priority. If you use the unit using the AC power adaptor
with size AA alkaline dry batteries installed, the power is provided from the AC power
adaptor.
or
AC power adaptor
AC-PW1
2
Ribbon
3
To DC IN
9-
GB