Teesa TSA5001 Manuel D'utilisation page 14

14
1. First make sure the switch at the side of the cooler and warmer is in OFF state, and then
insert the plug of the power cord into the socket of the unit.
2. Insert the plug of the cigarette lighter into the cigarette lighter in the car.
3. Cooling: set the power switch at the position of COLD The green indicator will be on
indicating the unit is in cooling mode.
4. Heating: set the switch at the position of HOT. The red indicator will be on indicating the
unit is in heating mode..
EN
1. DC power cord
2. AC power cord
3. Cold I hot switch
4. Indicator light
5. Power switch
1. The car engine is required.
2. Insert DC plug into DC1 2V cigarette lighter in car,bus, or boat
3. Shift the Function Switch to COLD or HOT, the appliance will start work
4. ECO Switch is useless in DC mode
OPERATION GUIDE- OPERATING PANEL
1 2
WHEN CAR POWER IS USED (DC 12V)
Owner's manual
3 4 5