Programmed Start Of Cooking; Multi-Sequence Cooking - Wolkenstein WMW 720 B Mode D'emploi

1. The colon flashes after switching on.
2. Use the
ROTARY KNOB
3. Press the S
TART
indicates the cooking time remaining.
DISPLAY

3.8 Programmed start of cooking

➢ Ensure that the time of the day is set properly (see chapter 3.3).
➢ Carry out your programming.
Example: It is 12:30. You want the appliance to operate for 9 minutes and 30
1. Set the power using the
2. Set the cooking time using the
3. Press and hold the
to enter the time of the day indication.
4. Set the desired starting time (see chapter 3.3, items 3,4 and
5).
5. Press the -
PRE SET
programme has been activated. Cooking will start at 14:20.
6. You can check the preset starting time by pressing the
/ -button (6).
SET CLOCK

3.9 Multi-Sequence Cooking

Some recipes require different cooking methods and cooking times to reach the best
result.
Example: You want to cook with 100P power for 3 minutes and then with 20P for
➢ This example is a 2-sequence-programming.
➢ You can programme up to 4 sequences by repeating the steps.
1. 100P power for 3 minutes.
a. Set the power using the
b. Set the cooking time using the
2. 20P power for 9 minutes.
a. Set the power using the
(8) to select the menu.
-button (7) to initialise cooking. The
seconds at 14:20 (2:20 pm).
-button(2.
POWER
ROTARY KNOB
- / -button (6) for 3 seconds
PRE SET CLOCK
/ -button (6) to confirm. The
CLOCK
9 minutes.
-button (2).
POWER
ROTARY KNOB
-button (2).
POWER
(8).
-
PRE
(8).
:
A.8
100P
9:30
14:20
100P
3:00
20P
39