Slackline-Tools SLACKTIVITY Mode D'emploi page 20

5. TIGHTENING THE SLACKLINE
• Now slightly tighten the Slackline by
pulling the remaining line away
20
from the Slackline: the pulley
system will now lock itself.
• Install the Tree-Friends by sliding them between the tree sling and the fixed-point at the point
where the tree sling sticks out of the tree (see Fig. 2).
• Now further adjust the Slackline tension by pulling.
• Note for the 25/35/45 m SlackTivity Kits and 18 m Soft 'n Slack Kits: For instructions on how to
install the second Express-Ring and the pulling aid (only 35/45 m SlackTivity Kits) see IV. and V.
• Through use the line is going to stretch – if too slack, simply retighten.
Fig. 9