baumarkt TC50A Mode D'emploi page 40

Care and Maintenance
If the lighting no longer functions, the bulb must be replaced A candle bulb is
Replacing the incandescent lamp
required with E14- socket, 220-240 V, max. 40 Watt.
The appliance operates using a hazardous voltage. Before replacing
Electrical shock hazard!
the bulb, disconnect the mains plug. Do not touch any live components
inside the socket.
Before opening the filter flap and removing the bulb, allow the bulb to
Risk of burns!
cool down.
Do not touch the new bulb with your fingers, because this will reduce
Important!
the service life. Use a dry cloth.
1. Disconnect the mains plug or isolate at the appropriate house fuse.
2. Press inwards the side sliding levers on the underside of the hood and open
the filter flap.
3. Remove the defective incandescent lamp from the socket and install a new
one.
4. Close the filter flap and press the two sliding levers outwards.
5. Reestablish the power supply.
18
General