Environmental Protection; Noise/Vibration Information; Declaration Of Conformity - Wurth Master STP 85 Notice D'utilisation

Environmental Protection

Recycling raw materials instead of
waste disposal
Machine, accessories and packaging
should be sorted for environment-
friendly recycling.
These instructions are printed on recycling paper
manufactured without chlorine.
The plastic components are labelled for categorized
recycling.
Guarantee
For this Würth machine, we provide a guarantee in
accordance with statutory/country-specific regula-
tions from the date of purchase (proof of purchase
by invoice or delivery note). Damage that has oc-
curred will be corrected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the guarantee.
Claims can be recognised only when the machine is
presented undisassembled to a Würth branch office
or a Würth field service employee.

Noise/Vibration Information

Measured
EN 50 144.
Typically the A-weighted sound pressure level of the
tool is 83 dB (A). The noise level when working can
exceed 85 dB (A).
Wear ear protection!
The typical hand-arm vibration is below 2.5 m/s
We declare under our sole responsibility that this
product is in conformity with the following standards
or standardization documents:
EN 50 144 according to the provisions of the regu-
lations 89/336/EEC, 98/37/EC.
01
Adolf Würth GmbH & Co. KG
ppa. M. Wölfle
Subject to change without notice
values determined

Declaration of Conformity

R. Bauer
according to
2
.
15