NetSpa Super Vac Guide D'utilisation page 17

6. Cleaning the cleaner after using the electric cleaner
WARNING : Make sure cleaner is power off when servicing the cleaner.
Head part cleaning
Take off the transparent body of the electric cleaner
(following the OPEN-CLOSE direction, rotate to
OPEN direction 90 degrees), and take the garbage
out of the transparent body, and then clean it.
Filter bag cleaning
A. Take out the rear part of filter bag, and take out the filter bag, and get out the garbage,
and then clean the filter bag.
B. Pull out the basket and filter bag from the rear of pool cleaner.
C. Detach the filter bag from the filter basket.
D. Clean the filter bag and filter basket.
7. Battery assembly and replacement
1. Push the button "a" forward along the arrow direction, until it not stuck the slot of the
connector.(as picture A shown)
2. Holding the body while reversing the connector, and removing the used battery from
the body.(as "b" in picture B shown) and replace new battery according to the sign of
positive & negative pole.
3. Twist the connector into the body in clockwise, until the button "a" can buckle in the slot
of connector. As picture E shown.
4. Now you can use the cleaner according to the instruction normally.
17