Charging The Battery; Turning The Tracker On - TRACKIMO Guardian 2G Mode D'emploi

− Be very careful when opening
the packaging.
1. Take each individual part out of
the packaging.
2. Check whether everything has
been delivered.
3. Check whether individual parts
show any signs of damage.
If this is the case, do not
use the tracker. Contact the
manufacturer.

Charging the battery

When you unpack the tracker for
the first time, the battery is empty.
Charge it as follows:
1. Connect the micro USB
connector on the charging cable
to the tracker.
2. Connect the other end of the
charging cable to the USB power
adaptor and then to the power
socket. Alternatively, you can also
connect the charging cable to a
computer.
3. Charge the tracker for 12 hours.
The red light will blink whilst
charging. When the tracker is fully
charged, the light will turn solid red.
4. Disconnect the tracker from the
charging cable.

Turning the tracker on

1. Take the tracker outside so that it
is in the open air.
2. Press and hold the on/off button
for at least 3 seconds.
The green light on the front will start
to flash.
3. Put the tracker down and wait for
31 EN