Equaliser; Switching Off The Unit; Specifications - IMG STAGELINE WAP-200 Mode D'emploi

4.8 Equaliser

For sound adjustment, it is possible to select
8 presettings or to save a user-defined sound
setting .
1) Press the button MENU .
2) Select the following:
 System settings  Equaliser
Equaliser
Normal
Flat
Jazz
Rock
Movie
3) The current setting is indicated by an aster-
isk * . Beneath the line
presettings are available:
Classic
Pop
News
My EQ
My EQ profile setup
Turn the knob CONTROL SELECT to select
the sound adjustment and then press the
knob to activate it .
4) For a user-defined adjustment, select the
line
My EQ profile setup
up the following menu:
My EQ profile setup
Bass: 0
Treble: 0
Loudness: Off
5) Select the line
Bass
knob CONTROL SELECT . A submenu with
an adjustment scale will appear:
All rights reserved by MONACOR
may be reproduced in any form or by any means for any commercial use.
22
- 14
6) Turn the knob CONTROL SELECT to adjust
the sound and then press the knob to re-
turn to the previous menu .
*
7) Adjust the high frequencies accordingly .
8) In the line
CONTROL SELECT to activate or deactivate
Fig. 49
the aurally compensated sound correction
(boosting of the high frequencies and low
frequencies when the volume is low) .
Movie , additional
9) When the sound has been adjusted as
desired, press the button BACK . The unit
will ask:
Save changes?
Confirm with
> 10) The menu with the sound presettings will
appear again (fig . 49) . For the user-defined
sound adjustment to take effect, select
the line
"System settings" will appear, and shortly
afterwards the current operating mode will
and call
be indicated again .

4.9 Switching off the unit

When the unit is switched off with the button
STAND BY (or
display will continue to show the date and
Fig. 50
the time . Use the same buttons to switch the
unit on again .
and then press the
Use the mains switch POWER to com-
pletely switch off the unit .
® INTERNATIONAL GmbH & Co. KG. No part of this instruction manual
Bass
Bass dB
10
14
Fig. 51
Loudness , press the knob
YES (preset) .
and confirm . The menu
My EQ
on the remote control), the

5 Specifications

Reception frequencies
FM: . . . . . . . . . . . . . . . . 87.5 – 108 MHz
DAB(+): . . . . . . . . . . . . . 174.928 MHz to
239.200 MHz
Audio input AUX: . . . . . . . . 1.2 V, 3.5 mm jack
Outputs
Line: . . . . . . . . . . . . . . . . 750 mV, RCA
Headphones: . . . . . . . . . 1 V, 3.5 mm jack
Audio formats supported: . MP3, WMA, WAVE,
AAC, FLAC
Menu languages: . . . . . . . . English, French,
German, Italian,
Spanish
Power supply
Mains voltage: . . . . . . . . 230 V~/50 Hz
Power consumption: . . . . 20 VA max.
DC power supply
(alternative): . . . . . . . . . . 15 – 25 V⎓
300 mA at 15 V
Battery for
remote control: . . . . . . . . 3 V, 1 × CR 2025
Dimensions: . . . . . . . . . . . 482 × 44 × 245 mm
Weight: . . . . . . . . . . . . . . . 2.7 kg
Subject to technical modification .