Description - Harman AKG C2000 Mode D'emploi

Description

1 Description
This condenser microphone has been designed on the basis of experience AKG
and its customers have gained worldwide over the last decades using models
such as the C414 B, C3000 and C1000 S. The C2000 uses advanced, reliable
components to meet the highest professional demands and withstand even
long-time, tough handling in the studio and on stage.
The C2000 provides the following features:
The transducer capsule has been acoustically designed with a cardioid polar
pattern to make the microphone suitable for use both in the recording studio
and on stage.
The diaphragm is made of a plastic foil that is gold-sputtered on one side to
prevent local shorts to the back electrode even at extremely high sound
pressure levels.
A switchable preattenuation pad allows you to increase the maximum SPL
capability of your C2000 by 10 dB for distortion-free close-in recordings.
Many mixing console input stages use small transformers that are susceptible
to overload, particularly at low frequencies. The C2000's pad prevents such
overload.
A bass cut filter that is switchable on the microphone body reduces low- end
distortion due to uncontrolled rumble or wind noise even further. Also, you can
eliminate the proximity effect (occurring at working distances of less than 4
inches) inherent in unidirectional microphones by switching the bass cut filter
in. The filter has a 6 dB/octave slope starting at 500 Hz.
The all-metal die-cast body shields the microphone very effectively against
RF interference when using it near radio transmitters or together with wireless
microphones or other communication systems and protects the microphone
from the hardships of live use.
The built-in pop screen is ideal for vocal use.
An internal spider-type shock mount for the transducer effectively
suppresses handling and cable noise.
C2000 11