Whirlpool UW6 F1C WB Guide De Démarrage Rapide

Read the Instructions for Use carefully before
using the appliance.
1
2
3 3
10
4
5
6
7
11
8
9
12
1. Control panel *
2. Light (LED system) *
3. Ice packs*
4. Ice Mate* or Ice tray*
5. Drawer divider*
6. Bottle rack*
7. Glass shelves
8. Rating plate with commercial name *
9. Door reversibility kit *
10. Area for freezing fresh food or to store
11. Area for storing frozen foods
12. Door seal
* Available on selected models
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts
the operation automatically. After starting the
appliance, wait at least 4-6 hours before placing food
into the appliance. When the appliance is connected
to the power supply, the display lights up and all
the icons appear on the display for approximately 1
second.
The default (factory) values of the freezer
compartment settings light-up.
HOW TO REVERSE DOOR SWING
- see enclosed Instructions for Use (Version_2)
Is recommended to reverse door swing by two
persons.
There is not foreseen door reversibility for:
- models with integrated handle
- models with glass panel on the door.
Speci cations, technical data and images
FREEZE CONTROL indicator
6TH SENSE FREEZE CONTROL indicator
6th Sense Freeze Control is an advanced technology
that reduces freeze burns and food preserves its
original quality and color.
ECO NIGHT FUNCTION
FREEZE CONTROL button
Eco Night Function
Press to activate/deactivate the Eco Night function.
The Eco Night function enables appliance energy
consumption to be concentrated in the reduced rate
hours, generally at night (see the Instructions for Use).
Freeze Control
Freeze Control is an advanced technology that
reduces temperature uctuations in the whole freezer
compartment to minimum.
To activate/deactivate the Freeze Control function
press for 3 seconds the FREEZE CONTROL button.
If the function is engaged and the user modify the
freezer temperature out of the working range, the
function is automatically switched o .
In case of Fast freezing is engaged, the function "Freeze
control" is inhibited until the Fast Freezing function
switched o .(see the Instructions for Use)
ALARMS TYPE Signal
Door open alarm
The acoustical alarm is activated and the Alarm Indicator
Temperature alarm
The Temperature display blinks (°C) and the Alarm Indicator
The Black Out Alarm icon remains on, the Alarm indicator
Long Black-Out alarm
Temperature display (°C) blinks, showing the maximum temperature reached during
blackout.
Malfunction The letter "F" blinks on the display (°C).
GB AR NL FR
QUICK START GUIDE
ON/STANDBY button
To put the product in Stand-by, press and hold for 3 seconds. All the icons
turn o except On/Standby indicator
press once (brie y) this button.
TEMPERATURE DISPLAY
TEMPERATURE SETTING button
The appliance is normally factory-set for operation at the
recommended temperature of -18°C. The internal temperature
can be adjusted between -16°C and -24°C, proceeding as
follows:
• Press to change the set point (°C). The storage temperature
can be changed by -1°C with each pressure of the button: the
value changes cyclically between -16°C and -24°C.
ALARMS TABLE
Cause
The door has remained open for more than 2 minutes.
blinks.
The inside temperature is not adequate.
remains on.
blinks and the
Prolonged power failure, able to cause the inside temperature to increase to 0°C.
Product malfunction.
. To reactivate the appliance
FAST FREEZE button
To activate/deactivate the Fast Freeze function simply
press Fast Freeze button (see the Instructions for Use).
The Fast Freeze function switches o automatically after
50 hours.
STOP ALARM button
Press in case of alarm (see the below Alarm Table).
BLACK OUT ALARM
Long Black-out Alarm indicator. (see
the Instructions for Use)
Cure
Close the door or press the Stop Alarm to mute the acoustical alarm.
Press the Stop Alarm button
blinks and the Alarm Indicator
Press the Stop Alarm button
blinks and the Alarm Indicator
Contact the After-sales Service.
EN
; the acoustical alarm stops, the Temperature Display (°C)
remains on until a temperature < -10°C is reached.
; the acoustical alarm stops, the Temperature Display (°C)
remains on until a temperature < -10°C is reached.
19515701200