MasterFlow AH-301 Mode D'emploi page 5

Repair and Maintenance Instructions
All repairs and maintenance
other than that recommended in
this instruction manual must be
performed by a qualified repair
technician who is experienced
with the repair of electric tools, a
qualified service organization, or
Master Appliance Corp.'s Service
Department.
Please contact Master's Customer
Service Department for genuine
Master Appliance replacement
parts or for repair service.
Full One Year Warranty
Master Heat Tools are carefully
tested and inspected before being
shipped from the factory.
We warrant our products to be free
from defects in materials and work-
manship, under normal use and
service, for one year from date of
purchase. In the event of a defect
in materials or workmanship we will
either repair or replace, at our
option, without charge any part
which in our judgement shows evi-
dence of such defect.
Warranty does not apply to wear-
able items such as attachments or
heating elements, which require
periodic replacement, nor does it
apply if the heat tool has been mis-
used, abused, tampered with or
altered.
www.masterappliance.com
Repair Service Dept
877-250-1934
sales@masterappliance.com
www.masterappliance.com
WARNING: Always unplug
your tool before performing any
maintenance or repairs. Use only
identical Master Appliance brand
replacement parts.
At the end of the warranty period,
Master Appliance shall be under
no further obligation, expressed or
implied. Master Appliance
assumes no responsibility for, and
this warranty shall not cover, any
incidental or consequential dam-
ages from any defect in products
or their use.
This warranty gives you specific
rights. You may also have other
rights which may vary from state to
state. Warranty information is
included within the Instruction
Manual for each product or may be
obtained by contacting Master's
Customer Service Department.
Cleaning
Unplug heat blower before clean-
ing. To clean outside of tool, use
only a mild soap and damp cloth.
Do not use other cleaning agents,
turpentine, gasoline, lacquer or
paint thinner, or other solvents that
may contain chemicals which are
harmful to plastics and other in-
sulating materials. Never immerse
tool in a liquid or allow a liquid to
enter inside the tool. Make sure all
vents and openings are free and
clear of debris.
Master Appliance Corp.
2420 18th Street
Racine, Wisconsin 53403
U.S.A.
Phone 262-633-7791
800-558-9413 (USA)
Fax 262-633-9745
sales@masterappliance.com
www.masterappliance.com
5