Programming Examples; Configuration Functions - Viscount MIDI-Pedalboard Mode D'emploi

MIDI-Pedalboard

PROGRAMMING EXAMPLES

If you wish to set transmission channel as 4.
1) press [SET] button
2) press [F#1] to recall the function
3) press [G1] to set the number 4
4) press [C#3] to confirm
If you wish to set Midi velociy as 64.
1) press the [SET] button
2) press [G#1] to recall the function
3) press [C#1] to set the unit
4) press [G1] to set the number 4
5) press [D#1] to set the tens
6) press [B1] to set the number 6
7) press [C#3] to confirm
MIDI TRANSMISSION CHANNEL
1) Press the [SET] button
2) Press [F#1]
3) Press a white key from 0 to 15 ([C1] corresponds to 0)
4) Press [C#3]
MIDI VELOCITY OF TRANSMITTED NOTES
1) Press the [SET] button
2) Press [G#1]
3) Press [C#1]
4) Press a white key from 0 to 9 ([C1] corresponds to 0)
5) Press [D#1]
6) Press a white key from 0 to 12 ([C1] corresponds to 0)
7) Press [C#3]
NOTE NUMBER OR PROGRAM CHANGE CONNECTED TO THE FIRST PEDAL
When the pedalboard is in note mode (see also par. "Pedalboard function mode") it will set the note
number of the first key. This function allows the adjustment of a transposition of the pedalboard; (please
note that with organ tuned with the A3 at 440Hz the keys will transmit C1 as Midi note 36, setting a
value of 37 for obtaining a transposition of +1 semitone.
When the pedalboard is in Program Change mode it will set the number of the Program Change transmitted
when [C1] is pressed.
1) Press [SET] button
2) Press [A#1]
3) Press [C#1]
4) Press a white key from 0 to 9 ([C1] corresponds to 0)
5) Press [D#1]

4. CONFIGURATION FUNCTIONS

17
EN