Determine Density Of Floating Solid Bodies (D >1 G/Cm 3 ) - KERN YDB-03 Mode D'emploi

Printout example KERN YKB-01N:
5.2.4 Determine density of floating solid bodies (d >1 g/cm
At solid material with density less than 1 g/cm
different methods is possible.
Method 1:
How to carry out see chap. 5.2.3.
As aid liquid is used a liquid with less density than that of the solid material, e.g.
ethanol approx. 0.8 g/cm
This method should be applied when the density of the solid is just slightly different
from that of the distilled water.
Using ethanol is not recommended, when the solid material is being attacked.
When working with ethanol, you must observe the applicable safety regulations.
28
KERN & Sohn GmbH
TYPE ACS 320-4
SN WB11AG0002
ID 1234
1.2188DS
-SIGNATURE-
- - - - - - - - - - - - - - - - -
3
.
Company
Model
Serial no.
Balance identification no.
Result
prepared by
3
)
3
, a density determination with two
YDB-03-BA-e-1410