Tripp-Lite NetCommander B070-016-19-IP Guide D'utilisation

NetCommander™ IP Console KVM Switch
Table of Contents
1 – Introduction
2 – Important Safety Instructions
3 – System Components
4 – Compatibility
5 – Features
6 – Rackmount Installation
7 – Connection (Single KVM Switch)
8 – Connection (Cascading Multiple KVM Switches) 7
9 – Initial Settings (Default IP Address)
9.1 Networks with a DHCP Server
9.2 Networks without a DHCP Server
10 – Static IP Addresses for Multiple KVM Switches 7
11 – Logging into the Web Configuration Interface 8
12 – Network (Configuration Screen)
13 – Network (SNMP Settings)
14 – Administration (User Settings)
15 – Administration (Switch Configuration)
16 – Administration (User Targets)
17 – Security (Settings)
18 – Security (SSL Certificate)
19 – Maintenance (Firmware Upgrade)
User's Guide
Model: B070-016-19-IP
Page 2
2
3
3
4
5
6
7
7
7
9
10
10
11
11
12
12
13
1111 W. 35th Street, Chicago, IL 60609 USA
(773) 869-1234 • www.tripplite.com
Copyright © 2008 Tripp Lite. All trademarks are the property of their respective owners.
20 – Restore Factory Settings
21 – Saving Changes & Logging Out
22 – Starting a Remote Session
23 – Taking Over a Busy Remote Session
24 – Toolbar
25 – Safe Mode
26 – On Screen Display (OSD)
27 – Port Settings
28 – Security
29 – User Settings
30 – Scanning Computers (F4)
31 – Tuning (F5)
32 – Moving the Label (F6)
33 – Upgrading the NetCommander IP Firmware
34 – Troubleshooting
35 – Specifications
36 – Storage and Service
37 – Warranty & Warranty Registration
Español
Français
1
Page 13
13
14
14
15
19
20
22
24
24
25
25
25
25
28
29
29
30
31
61