Sangean RCR-2 Mode D'emploi page 17

Time Zone switch
In normal case, please set time zone switch to 0 position.
For some countries where don' t provide radio controlled time facility
but still can receive radio controlled time signal from nearby
GB
countries . If the time zone is different, you may use the time zone
switch to correct the time.
For example, in Turkey which is one hour ahead of Central European
time but still can receive radio controlled time signal from Germany,
you may use this time zone switch to correct the local time (still radio
controlled time).
Suggest to set the switch at 0 position in normal case.
Troubleshooting /RESET
If the radio fails to operate correctly or some digits on the display are
missing or incomplete, carry out the following procedures.
1. With the aid of a suitable implement (the end of a paper clip),
press the RESET button 6 for a few seconds, this will reset the
microprocessor, clock time and clear all the stations stored in
preset memory .
16