Safety Rules; User's Manual - Ryobi EHG-2002C Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 4
GB
F
D

SAFETY RULES

IMPORTANT: READ THESE SAFETY INSTRUCTIONS
Before using the heat gun, please read the manual
carefully, especially the safety instructions.
Keep this manual for future reference.
WARNING
This heat gun may start a fire if appropriate
precautions are not taken.
This device shall connect to such power supply
network which impedance equal to or less than 0.0.63
+ j0.039 Ω, or the agreement of power supplier or user,
any misconnection may cause high voltage fluctuation.
The heat from the heat gun may reach combustible
materials which you may not be able to see.
Do not leave the heat gun unattended while it
is operating.
Keep the heat gun away from rain or water to avoid
risks of fire or electric shock.
Store under cover in a dry place.
The nozzle gets extremely hot: wear gloves and
eye protection.
For your own safety, please read this manual carefully.
When servicing, always use manufacture's original
parts to replace worn or damaged parts.
Do not direct the hot airflow towards people or animals.
Never use the heat gun near flammable materials or
in the presence of flammable gases.
Never reduce the hot airflow by blocking or covering
the nozzle.
Be careful not to touch the nozzle as it becomes
extremely hot.
Ensure that the nozzle does not come into contact
with materials during or just after operation.
Always wear eye protection when stripping
paint overhead.
When using the heat gun, do not wear loose fitting
clothing or jewellery, wear non-slip footwear and a
hair net to protect and retain hair.
Make sure you are always well balanced when using
the hot air gun.
Ensure that the heat gun is always clean, dry and free
from oil or grease.
Never force the tool or accessories, and only use
them for the purpose for which they are designed.
Always keep the heat gun upright or suspend it the
stand supplied.
Never use the heat gun in a damp or very wet
(for example: bathrooms, saunas).
E
I
P
NL
S
DK
N
FIN
English
Never leave the heat gun out in the rain and do not
use it on very damp days.
Never push anything down inside the hot air nozzle.
Always allow the heat gun to cool down completely
before storing it.
Always store the heat gun in a safe place, out of the
reach of children. It is not a toy.
A fire may result if the appliance is not used with care,
therefore:
- be careful when using the appliance in places
where there are combustible materials;
- do not apply to the same place for a long time;
- do not use in presence of an explosive atmosphere;
- be aware that heat may be conducted to combustible
materials that are out of sight;
- place the appliance on its stand after use and allow
it to cool down before storage;
- do not leave the appliance unattended when it is
switched on.
Check the area where the heat gun is to be used.
Behind ceiling, floors and false ceilings may contain
highly flammable material. Always check these before
using the heat gun.
Keep the work area clean and uncluttered.
Keep the work area well lit.
Keep children and visitors away from the work area,
heat gun and any extension cables.
To reduce the risk of electric shock, please wear
proper shoe to avoid contact with earthed surfaces.
Never carry the heat gun by its power cable or pull on
the cord to disconnect it.
Use only suitable extension cables.
Inspect the heat gun cable regularly and, if damaged,
have it repaired by authorized service center.
When the heat gun is used outdoors, use only
extension cables that are suitable or exterior use.
When working on small or irregular shaped objects,
clamp the object in a vice or clip.
Ensure the tool switch is at OFF position before
plugging in.
Temperature Indicator and Intermittent Flashing.
The temperature indicator gives the temperature for
reference only. As the heat gun has maximum
temperature protection function, when it reaches the
maximum temperature (about 650 ºC), the 6 LED
(LCD indicator) may flash intermittently, this is normal
and it doesn't mean there is a problem.
5
GR
H
CZ
RUS
RO
PL

Hide quick links:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ehg-2002ledEhg-2002lcd

Table des Matières