Small Repairs - Do It Yourself - Kränzle UFO 300 Manuel D'utilisation

14
Small repairs -
GB
No water comes from the nozzle but the pressure gauge shows
full pressure: Most probably the nozzle is clogged.
do it yourself!
1.
Unscrew the nozzles from the
bracket on the cleaning rotor.
2.
Straighten a paper clip.
3.
Clean the nozzle with the
straightened paper clip.
4.
Rinse high-pressure hose and cleaning
rotor. Screw in nozzles again. Use teflon
tape for sealing. ... and you can proceed
withthe high-pressure cleaning as
before !