KitchenAid KUDE40FXBL1 Instructions D’installation page 22

Double-check dishwasher
alignment in cabinet opening
o
screwto \
side cabinet
NOTE: Do not drop screws into bottom of dishwasher.
Locate brackets on top of dishwasher and secure
dishwasher to countertop with two, #10 x 4%" Phillips-head
screws (included). The dishwasher must be secured to
keep it from shifting when door is opened.
Check that dishwasher is still level front-to-back and
side-to-side in cabinet opening.
Remove lower dish rack
Check that top of door does not contact screws, brackets
or countertop. If it does, adjust leveling legs.
Open dishwasher door, remove lower dish rack, and
place towel over pump assembly and lower spray arm of
dishwasher. This will keep screws from falling into pump
area when securing dishwasher to countertop.
Open door and check that space between dishwasher
cabinet opening and tub is equal on both sides. If
spacing is not equal, loosen bracket screws secured
and shift tub. Tighten bracket screws.
22