Epson WorkForce WF-7510 Guide Rapide page 20

Sending a Fax From the Control Panel
You can send a fax by manually entering a fax number, as described below.
Note: To dial the number using a telephone, by redialing, or by selecting from your
speed dial list, see the next section. To send a fax from your computer using the Epson
FAX Utility, see your online User's Guide.
1. Press the
2. Place your original(s) for faxing (see page 7).
3. Use the numeric keypad to enter the fax number. You can enter up to 64 digits.
4. To change fax settings, press x
5. Press the
Note: If the recipient's fax machine prints only in black and white, your fax is
automatically sent in black and white even if you select color.
■
If you are scanning with the ADF, your document is automatically scanned and
faxed.
■
If you place your document on the scanner glass, you can scan additional pages
after the first one is sent.
■
If the fax number is busy, you see a redialing message and the product redials
after one minute. To redial immediately, press
To cancel faxing, press y
Other Ways to Dial a Fax Number
Here are some other ways you can dial a fax number:
■
Redial/Pause
■
Speed Dial
group dial entry, press the
■
If you've connected a telephone to the product, dial the number from the phone.
Select
Send
Note: Don't hang up the phone until you begin transmitting the fax.
If you turn off the product, the following data stored in the product's temporary memory
will be lost: received faxes that haven't yet been printed, faxes scheduled to be sent
later, and faxes being retransmitted automatically.
20
Sending a Fax From the Control Panel
button.
Fax
or
B&W Color x Start
Stop
: Redial the last fax number you used.
: Select or type the number of the speed dial entry and press
, then press the
B&W
and select settings as necessary.
Menu
button to send your fax.
at any time.
button twice.
Speed Dial
or
Color Start
x
.
Redial/Pause
button.
. To use a
OK