Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
c
ORRect
1.
Wear safety goggles when using the tool.
2.
Never allow children or people who are unfamiliar with the instructions to use the tool.
3.
Stop using the tool while people, especially children, or pets are nearby.
4.
Only use the tool in daylight or good artificial light.
5.
Before each use, check the tool for damage and have it repaired if necessary.
6.
Keep your hands and feet away from the cutting elements at all times, especially when
switching on the motor.
7.
Protect yourself from possible injury caused by the use of cutting tools.
8.
Dress properly! Do not wear loose clothing or jewellery which can be caught in moving parts.
Wear thick gloves, non-slip footwear and safety goggles when using the tool.
9.
Switch off the tool before:
- cleaning or clearing a blockage;
- performing any inspection, maintenance, and cleaning work.
10. When operating the tool, always make sure that you are in a safe working position.
11. Never use replacement parts or accessories not provided or recommended by the
manufacturer.
12. Always ensure that the ventilation slots are not covered or obstructed.
13. Never attempt to modify the tool in any way.
14. When transporting or storing the tool, always fit it with the protective cover.
15. Use the tool only for its intended purposes.
16. Make sure that you know clearly how to switch off the tool immediately in case of emergency.
17. Familiarize yourself with potential hazards of the tool.
EN
A
s
u
nd
AFe
se
45
O
t
t
F
he
OOl
Publicité
Table des Matières
