Reference - Insignia NS-1DRVCR Guide De L'utilisateur

To finalize a disc, refer to "Disc Settings" on
page 15.
Unfinalized DVD+RWs are playable on regular
DVD players.
The edited contents of a DVD+RW disc is
compatible with regular DVD players only after
finalization.
The edited contents of a DVD+R disc is not
compatible with regular DVD players. (Hide,
chapter combine, added chapter mark, and so
on.)
How long finalization takes depends on the type of
disc being finalized, how much is recorded on the
disc, and the number of titles on the disc.

Reference

Controlling your TV with the supplied
universal remote control
You can control the sound level, input source,
and power switch of your LG TV with the
supplied universal remote control.
You can control your TV using the following
buttons.
Controlling other TVs with the universal
remote control
You can control the sound level, input source,
and power switch of non-LG TVs as well. Enter
the appropriate manufacturer code from the
table below.
To enter the manufacturer code:
1 While holding down the TV POWER button,
2 Release the TV POWER button. The remote
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the one
that works with your TV.
Language code list
Use this list to input your desired language for
the following initial settings: Disc Audio, Disc
Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
www.insignia-products.com
To...
Note
Depending on the you are connecting, you may
not be able to control your TV using some of the
buttons.
press the number buttons to select the
manufacturer code for your TV (Refer to
table).
control is set to control the TV.
Manufacturer Code #
Zenith 1,3,4
Samsung 6,7
Sony 8.9
Hitachi 4
Note
• Depending on your TV, some or all buttons may
not function on the TV, even after entering the
correct manufacturer code.
• If you enter a new code number, the code
number previously entered will be erased.
• When you replace the batteries of the remote,
the code number you have set may be reset to
the default setting. Set the appropriate code
number again.
Code # Language
6566 Lingala
6565 Lithuanian
6570 Macedonian
Code #
7678
7684
7775
27