Utano T180 BARRIER Mode D'emploi page 239

gettINg CONNeCteD: WI-FI
Wi-Fi gives you wireless Internet access. To use Wi-Fi on your
mobile phone, you need to have an access to wireless access
points (hotspots). Obstacles that block the Wi-Fi signal will
reduce its strength.
Connecting to a wireless network
1. After turning on Wi-Fi, touch
2. Touch Wireless & networks > Wi-Fi settings. You will see
a list of detected Wi-Fi networks in the Wi-Fi networks
section.
3. Touch a Wi-Fi network to connect to it.
• If you select an open network, you will be automatically
connected to the network.
• If you select a network that is secured with Wired Equiva-
lent Privacy (WEP) and connect to it for the first time, enter
the password, and then touch Connect. If you connect to a
secured wireless network that you have already used, you
will not be prompted to enter the password again unless
you reset your mobile phone to its default settings.
opening the browser
1. Touch > Browser to go to the default home page.
2. Open the browser options menu and perform one of the
following operations, press
• New window: Touch to open a new window.
• Bookmarks: Touch to display bookmarks.
• Windows: Touch to go to the web preview screen. You can
switch to another web page or open a new web page on
this screen.
• Refresh: Touch to refresh the current page.
Getting Connected: Wi-Fi
> Settings.
:
239