Pelgrim PCM128RVS Manuel page 50

OPERATION
Procedure
1 1. Place the pork directly on the rack with the turntable.
2. Brush a little oil on it.
3. Roast at 'AC-1'.
4. Take the meat from the combi-microwave. Drain off the excess
roasting juices.
5. Wrap the meat in aluminium foil and let it stand for 10 minutes.
6. Serve the meat with apple sauce.
2 1. Place the beef directly on the rack with the turntable.
2. Brush a little oil on it.
3. Roast at 'AC-4'.
4. Take the meat from the combi-microwave. Drain off the excess
roasting juices.
5. Wrap the meat in aluminium foil and let it stand for 10 minutes.
6. Serve with boiled potatoes and gravy.
1. Press the auto cook button.
The display shows 'AC-1' and the indicator light comes on.
2. Press again (a number of times) on the auto cook button to
select the function (see table).
3. Turn the control dial to set the weight.
In the display you will see the set weight.
▷ You can set a weight up to 2000 grams in steps of 50 grams.
• See the table for the settings and select the correct weight.
4. Press the start button.
The microwave starts with the chosen settings; the
microwave light comes on, the turntable starts rotating and
the time in the display counts down.
• You can check the settings at any moment during the cooking
by pressing the auto cook button.
Auto cook table
The table below provides information for each dish on the
procedure and the cookware to use.
Cookware
Rack with turntable.
Rack with turntable.
EN 21