cecotec 04946 Manuel D'instructions page 60

ENGLISH
Back Home mode
Press the Back Home button on the robot vacuum cleaner or from the app to send the
-
robot vacuum cleaner to the self-emptying base. The robot vacuum cleaner will stop
vacuuming until it reaches the base.
- This mode can be activated during any cleaning cycle.
The robot vacuum cleaner will take the shortest route back to the self-emptying base
-
thanks to its map-memorisation feature and the smart Back Home function.
Upon completing a cleaning cycle or when the battery is low, thanks to its TotalSurface
-
2.0 technology, the robot vacuum cleaner will automatically return to the self-emptying
base to avoid running out of battery. Once the robot has recharged, it will resume
cleaning from the point it has stopped.
Note
The robot vacuum cleaner will not be able to return to the self-emptying base if it can't easily
access it. If this happens, manually place it in the self-emptying base.
Functions
Pause
While the robot vacuum cleaner is running, press the Start/Pause button on the robot
vacuum cleaner or select it in the app to pause the cleaning process. Press the Start/Pause
button on the robot vacuum cleaner or on the app to resume the cleaning process.
Standby
The robot vacuum cleaner will automatically enter standby mode after 10 minutes of
-
inactivity.
Press the Start/Pause button on the robot vacuum cleaner or in the app to activate it
-
again.
Cleaning modes
The robot vacuum cleaner includes different modes and functions that can be toggled
-
from the app.
In addition, in every one of the cleaning modes on the app, you will be able to select the
-
Turbo mode on carpets, which activates the maximum suction power when the robot
vacuum cleaner detects a carpet.
Edge mode
- When this mode is selected, the robot vacuum cleaner will clean along walls and around
furniture (e.g., table or chair legs).
- Press the edge cleaning mode in the app.
60