Toshiba HWS-455XWHM3-E Manuel D'installation page 48

Hydro Unit
 FC for Hydro Unit (FC for Remote controller)
• Hydro unit function code setting is available only for the header remote controller.
• Set function codes for various operation modes with the remote controller.
(1) Press the [
SETTING screen, then press the [
(2) Press the [
value.
FC No.
FIX
(3) Press the [
47-EN
] / [ ] button to select "FC for Hydro unit" (or "FC for Remote controller") on the FIELD
] button.
FIELD SETTING MENU(2/2)
FC for Hydro unit
FC for Remote controller
SET
] / [ ] button to select FC number or Data, then press the [
FC for Hydro unit
Data
0001
] button. The set value is registered.
FIELD SETTING MENU(2/2)
FC for Remote controller
or
FC for Remote controller
FC No.
or
FIX
– 47 –
Installation Manual
FC for Hydro unit
SET
] / [ ] button to set the
Data
0000