Hitachi RAK-50PXA Manuel De Fonctionnement page 22

ONCE TIMER (ON/OFF TIMER) OPERATION
To cancel Reservation
Point the signal window of the remote controller towards the indoor unit and press
and "ON or OFF set time" goes out with a beep and the (TIMER) lamp on the indoor unit turns off.
NOTE
User can set only one of the OFF-timer, ON-timer or ON/OFF-timer.
If WEEKLY TIMER already set, by setting the ONCE TIMER, ONCE TIMER operation
ONCE TIMER operation is complete, WEEKLY TIMER operation will be activated.
Downloaded from www.Manualslib.com
OFF TIMER
The device can be set to turn off at a preset time.
1. Press
2. Set the "turn-off time" with
1
3. After setting, direct the remote controller towards the indoor and press
ON TIMER
The device will turn on at a designated time.
1. Press
2. Set the "turn-on time" with
3. After setting, direct the remote controller towards the indoor and press
AIR PURIFYS
(SEND) button.
A beep sound emitted from indoor unit and the (TIMER) lamp on the indoor
unit lights up.
ON/OFF TIMER
The device will turn on (off) and off (on) at the designated time.
The switching occurs first at the preset time that comes earlier.
The arrow mark appears on the display to indicate the sequence of switching
operations.
1. Press
display.
2. Set the "turn-off" time with
controller towards the indoor and press
3. Press
The
4. Set the "turn-on" time with
5. After setting, direct the remote controller towards the indoor and press
A beep sound emitted from indoor unit and the (TIMER) lamp on the indoor
unit lights up.
The timer may be used in three ways: OFF-timer, ON timer and ON/OFF (OFF/ON)-
timer. Set the current time first because it serves as a reference.
manuals search engine
(OFF-TIMER) button.
(SEND) button.
and "set time" lights up instead of blinking.
A beep sound emitted from indoor unit and the (TIMER) lamp on the
indoor unit lights up.
(ON-TIMER) button.
(TIME) button.
and "set time" light up instead of blinking.
(OFF-TIMER) button so that
(TIME) button. After setting, direct the remote
(ON-TIMER) button so that
and blink.
(TIME) button.
(SEND) button
and set "turn-on" time light up instead of blinking.
– 22 –
and blink on the display.
(TIME) button.
and blink on the display.
and blink on the
(SEND) button.
and set "turn-off" time light up.
-
(CANCEL) button.
is prioriti z ed. When