Compulsary Inspections And Checks; Storage And Maintenance - Tractel To13 Instructions D’utilisation

 CC : With the container lugs for slanted pulling, respect the recommended angles
between slings.
 CC : Never use the container lugs meant for vertical pulling to perform slanted pulling.
 TO : The hooks and their bearing surfaces on the drum must be free from grease or oil.
 TO : The diameter in the drum must be between 80 and 90 mm for the hooks to pass.
 Never overload the hooks, check the working load limit before performing any lifting (load
per pair of hooks).
 Working temperature : -20° to +100°C.

COMPULSARY INSPECTIONS AND CHECKS

Maintenance inspections and operations must be performed by qualified and entitled
 Check on start up (or starting back up): in compliance with the national regulations.
 Compulsory periodical check in compliance with the national regulations. Recommended
at least every 12 months by TRACTEL SOLUTIONS SAS.
 A thorough examination paying particular attention to any alteration of parts due to
an impact, corrosion, cracking or deformation must be conducted a minimum of
twice a year, every month in the case of heavy-duty use in an aggressive
atmosphere.
 Pay special attention to the good adherence and good state of the elastomer coating of
the pads to their metal reinforcement
 TRACTEL SOLUTIONS is at your disposal in order to conduct any regulatory check.
Maintenance inspections and operations must be performed by qualified and entitled
 Regularly check the equipment is in perfect working order (before every use), in particular
the semi-automatic system and the pivoting pads.
 Perform visual inspection before every use.
 Any part with a defect must be replaced by a TRACTEL SOLUTIONS part.
 The equipment has to be stored in an safe place, at ambient temperature
 During the storage, the equipment has to be in a stable position without risks of tipping
over. On request, Tractel Solutions supplies appropriate storage supports
 Any overloaded equipment must be immediately withdrawn from use.
M 6119 – 01/2010
persons.

STORAGE AND MAINTENANCE

persons.
6