D-Link DWP-1010KT Guide D'installation Rapide page 5

PRODUCT SETUP
POLE-MOUNT INSTALLATION
7. Pull the 10-meter RJ45
cable through the blue
base cover and plug it into
the PoE port on the PoE
injector. Connect the power
cable to the PoE injector
and plug the power cable
into a power source. In the
second phase plug 1-meter
RJ45 cable from PoE
Injector into M15 Internet
port. Connect 12V power
adapter to power source
and M15 router.
8. Secure the base cover to
the DWP-1010 by using the
M3 x 4mm screws (4 pcs).
9. Install the stainless steel
pipe clips onto the DWP-
1010 and loosely secure
it to the pole. Open the
falcon app and follow the
instructions. Lastly, secure
the device tightly to the
pole.
DWP-1010K T
1-8
1-9
3