Télécharger Imprimer la page

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 69

Liens rapides

This product can be set up using any
current web browser, i.e., Internet
Explorer 6.x, Netscape Navigator 7.x.
Before Your Begin
1.
If you purchased this Router to share your high-speed Internet connection with other
computers, you must have either an Ethernet-based Cable or a DSL Router with an
established Internet account from an Internet Service Provider (ISP).
2.
It's best to use the same computer that is connected to your router for configuring the DSL-
514 ADSL Router. The DSL-514 acts as a DHCP server and will assign all the necessary IP
address information on your network. See at the Quick Installation Guide or the Manual on the
CD-ROM for setting each network adapter to automatically obtain an IP address.
Check Your Package Contents
These are the items included with your DSL-514 purchase:
If any of the above items are missing, please contact your reseller.
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective
holders. Software and specifications subject to change without notice. DSL-514.ADSL Router
All manuals and user guides at all-guides.com
• DSL-514 ADSL Router
• CD-ROM (containing Manual and Warranty)
• Ethernet Cable
• 9V AC, 1A Power Adapter
•ADSL Cable (standard telephone cable)
different voltage rating
will damage and void
the warranty for this
product.
1
DSL-514
ADSL Router
Using a power
supply with a

Publicité

loading

Sommaire des Matières pour D-Link DSL-514

  • Page 1 It’s best to use the same computer that is connected to your router for configuring the DSL- 514 ADSL Router. The DSL-514 acts as a DHCP server and will assign all the necessary IP address information on your network. See at the Quick Installation Guide or the Manual on the CD-ROM for setting each network adapter to automatically obtain an IP address.
  • Page 2 First, connect the power adapter to the receptor at the back panel of the DSL-514 and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation.
  • Page 3 Connecting Additional Computers To The DSL-514 ADSL Router Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet- equipped computers to the DSL-514 LAN ports on the back panel of the DSL-514. When you have completed the steps in this Quick Installation Guide,...
  • Page 4 Configure IP Settings To connect to the network, make sure the network adapter in your computer is configured properly. Here’s how to configure the network adapter to obtain an IP address automatically for the DSL-514 ADSL Router. For Microsoft Windows XP...
  • Page 5 All manuals and user guides at all-guides.com The dialog box displays with a list of currently installed network items. Click Internet Protocol (TCP/IP) Click Properties Select you can get IP settings assigned automatically. Select Obtain an IP address automatically Click...
  • Page 6 All manuals and user guides at all-guides.com For Microsoft Windows 2000 Go to Start > select Setting > click the Control Panel > Double-click on the Network Connection and Dial-Up Connections icon Double-Click on the Network Connection and Dial-Up Connections Right-click the Local Area Connection...
  • Page 7 All manuals and user guides at all-guides.com The dialog box displays with a list of currently installed network items. Click Internet Protocol (TCP/IP) Click Properties Select you can get IP settings assigned automatically. Select Obtain an IP address automatically Click Restart your computer...
  • Page 8 All manuals and user guides at all-guides.com For Microsoft Windows ME Go to Start > select Setting > click the Control Panel > Double-click on the Network icon Double-Click on Network The Network dialog box displays with a list of currently installed network components.
  • Page 9 All manuals and user guides at all-guides.com Select you can get IP settings assigned automatically. Select Obtain an IP address automatically Click Restart your computer...
  • Page 10 All manuals and user guides at all-guides.com For Microsoft Windows 98SE Go to Start > select Setting > click the Control Panel > Double-click on the Network icon Double-Click on Network The Network dialog box displays with a list of currently installed network components.
  • Page 11 All manuals and user guides at all-guides.com Select you can get IP settings assigned automatically. Select Obtain an IP address automatically Click Restart your computer...
  • Page 12 All manuals and user guides at all-guides.com Logging into The DSL-514 Open your Web browser and type “http://192.168.0.2” into the URL address box. Then press Enter or Return key. The logon pop-up screen will appear. When you first log in, your...
  • Page 13 All manuals and user guides at all-guides.com Once you have logged in, the Home screen will appear.
  • Page 14 All manuals and user guides at all-guides.com Using The Setup Wizard Check your ISP information, If you configure for Dynamic IP Address, refer to page 14-18. If you configure for Static IP Address, refer to page 19-22. If you configure for PPP type, refer to page 23-26. If you configure for Bridge Mode, refer to page 27-32.
  • Page 15 All manuals and user guides at all-guides.com You will see the following screen. Click Next Set up your new password. You have the option to establish an 8~30 characters password. Click Next...
  • Page 16 All manuals and user guides at all-guides.com Choose your time zone. Click Next Select one of these setting. Select Dynamic IP Address If you are unsure of which setting to select, please contact your Internet Service Provider. Click Next...
  • Page 17 All manuals and user guides at all-guides.com If your ISP requires a Dynamic IP Address, then this screen will appear: Enter all values and select connection type of this screen. Refer those data from your ISP or phone company. Click Next Do not use the numbers displayed in these fields.
  • Page 18 All manuals and user guides at all-guides.com You will be returned to Home tab. Click Close...
  • Page 19 All manuals and user guides at all-guides.com Configuring for Static IP Address Click Run Wizard You will see the following screen. Click Next...
  • Page 20 All manuals and user guides at all-guides.com Set up your new password. You have the option to establish an 8~30 characters password. Click Next Choose your time zone. Click Next...
  • Page 21 All manuals and user guides at all-guides.com Select Static IP Address setting. Select Static IP Address If you are unsure of which setting to select, please contact your Internet Service Provider. Click Next If your ISP requires a Static IP Address, then this screen will appear.
  • Page 22 All manuals and user guides at all-guides.com You Setup is Completed. Click Restart You will be returned to Home tab. Click Close...
  • Page 23 All manuals and user guides at all-guides.com Configuring for PPP Mode Click Run Wizard You will see the following screen. Click Next...
  • Page 24 All manuals and user guides at all-guides.com Set up your new password. You have the option to establish an 8~30 characters password. Click Next Choose your time zone. Click Next...
  • Page 25 All manuals and user guides at all-guides.com Select one of these settings. Select PPPoE/PPPoA If you are unsure of which setting to select, please contact your Internet Service Provider. Click Next If your ISP uses PPP Mode (Point-to-Point Protocol), then this screen will appear.
  • Page 26 All manuals and user guides at all-guides.com Your Setup is completed. Click Restart You will be returned Home tab. Click Close...
  • Page 27 All manuals and user guides at all-guides.com Configuring for Bridge Mode Click Run Wizard You will see the following screens. Click Next Click Next...
  • Page 28 All manuals and user guides at all-guides.com Set up your new password. You have the option to establish an 8-30 characters password. Click Next Choose your time zone. Click Next...
  • Page 29 All manuals and user guides at all-guides.com Select one of these setting. Select Bridge Mode If you are unsure of which setting to select, please contact your Internet Service Provider. Click Next Your Setup is completed. Enter all values of this screen.
  • Page 30 All manuals and user guides at all-guides.com Your Setup is completed. Click Restart You will be returned Home tab. Click Close...
  • Page 31 All manuals and user guides at all-guides.com To connect to the network, make sure network adapter in you computer is configure properly. Right-click Local Area Connection icon, and then select Properties. Select Properties The dialog box displays with a list of currently installed network items.
  • Page 32 All manuals and user guides at all-guides.com Network (TCP/IP) Properties window appears. Enter all values of this screen. Refer those data from your ISP or phone company. Select Use the following IP address Enter all values of this screen. Refer those data from your ISP or phone company.
  • Page 33 All manuals and user guides at all-guides.com Test Your Internet Connection Click to Exit Then Relaunch your Web browser (i.e., Internet Explorer or Netscape Navigator), to link to your favorite Web site to test your Internet connection.
  • Page 34 All manuals and user guides at all-guides.com Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product.
  • Page 35 Garantie. • ADSL-Kabel (Standard-Telefonkabel) Sollte eines dieser Teile fehlen oder beschädigt sein, wenden Sie sich bitte an Ihren Fachhändler. © 2003 D-Link Systems Inc. Alle Rechte vorbehalten. Marken und eingetragene Marken sind Eigentum ihrer jeweiligen Inhaber. Änderungen vorbehalten. DSL-514 ADSL-Router...
  • Page 36 DSL-514 ADSL-Router mit dem Netzwerk verbinden Verbinden Sie das Netzteil zunächst mit der Buchse auf der Rückseite des DSL-514, und schließen Sie das Netzteil danach an eine Steckdose an. Das Aufleuchten der LED-Betriebsanzeige signalisiert eine ordnungsgemäße Funktion des Geräts. Verbinden Sie ein Ende des Ethernet-Kabels mit dem LAN- Anschluss 1 auf der Rückseite des DI-514 und das andere Ende mit...
  • Page 37 Weitere Computer mit dem DSL-514 ADSL-Router verbinden Verbinden Sie den Computer über Ethernet-Kabel (CAT5 UTP) mit dem LAN-Anschluss auf der Rückseite des DSL-514. Wenn Sie die Schritte gemäß dieser Kurzanleitung für die Installation ausgeführt haben, entspricht Ihr Netzwerk ungefähr folgender Darstellung:...
  • Page 38 All manuals and user guides at all-guides.com IP-Einstellungen anpassen Um eine Verbindung mit einem Netzwerk herzustellen, muss die Netzwerkkarte des Computers richtig konfiguriert sein. Im Folgenden finden Sie Hinweise zur Konfiguration einer Netzwerkkarte, so dass die IP- Adresse für den 514 ADSL-Router automatisch zugewiesen wird. Unter Microsoft Windows XP Klicken Sie auf Start...
  • Page 39 All manuals and user guides at all-guides.com Es wird ein Dialogfeld mit einer Liste der installierten Netzwerkkomponenten angezeigt. Klicken Sie auf Internetprotokoll (TCP/IP). Klicken Sie auf Eigenschaften. Sie können die IP-Einstellungen automatisch zuweisen lassen. Wählen Sie IP-Adresse automatisch beziehen. Klicken Sie auf OK.
  • Page 40 All manuals and user guides at all-guides.com Unter Microsoft Windows 2000 Klicken Sie auf Start > Einstellungen> Systemsteuerung> und doppelklicken Sie auf das Symbol Netzwerk- und DFÜ- Verbindungen. Doppelklicken Sie auf das Symbol Netzwerk- und DFÜ- Verbindungen. Klicken Sie mit der rechten Maustaste auf das Symbol LAN-...
  • Page 41 All manuals and user guides at all-guides.com Es wird ein Dialogfeld mit einer Liste der installierten Netzwerkkomponenten angezeigt. Klicken Sie auf Internetprotokoll (TCP/IP). Klicken Sie auf Eigenschaften. Sie können die IP- Einstellungen automatisch zuweisen lassen. Wählen Sie IP-Adresse automatisch beziehen. Klicken Sie auf OK.
  • Page 42 All manuals and user guides at all-guides.com Unter Microsoft Windows Me Klicken Sie auf Start > Einstellungen > Systemsteuerung > und doppelklicken Sie auf das Symbol Netzwerk. Doppelklicken Sie auf das Symbol Netzwerk Im Dialogfeld Netzwerk wird eine Liste der aktuell installierten Netzwerk- komponenten angezeigt.
  • Page 43 All manuals and user guides at all-guides.com Sie können die IP-Einstellungen automatisch zuweisen lassen. Wählen Sie IP-Adresse automatisch beziehen. Klicken Sie auf OK. Starten Sie den Computer neu.
  • Page 44 All manuals and user guides at all-guides.com Unter Microsoft Windows 98SE Klicken Sie auf Start > Einstellungen > Systemsteuerung > und doppelklicken Sie auf das Symbol Netzwerk. Doppelklicken Sie auf das Symbol Netzwerk. Im Dialogfeld Netzwerk wird eine Liste der aktuell installierten Netzwerk- komponenten angezeigt.
  • Page 45 All manuals and user guides at all-guides.com Sie können die IP-Einstellungen automatisch zuweisen lassen. Wählen Sie IP-Adresse automatisch beziehen. Klicken Sie auf OK. Starten Sie den Computer neu.
  • Page 46 All manuals and user guides at all-guides.com Anmelden am DSL-514 Starten Sie den Webbrowser, und geben Sie in das Adressfeld „http://192.168.0.2“ ein. Drücken Sie anschließend die Eingabetaste. Das Anmelde- dialogfeld wird angezeigt. Wenn Sie sich zum ersten Mal anmelden, verwenden...
  • Page 47 All manuals and user guides at all-guides.com Nach der Anmeldung wird der Bildschirm Home angezeigt.
  • Page 48 All manuals and user guides at all-guides.com Der Setup-Assistent Überprüfen Sie Ihre ISP-Informationen, Wenn Sie den Router für dynamische IP-Adressen konfigurieren möchten, beachten Sie die Seiten 14–18. Wenn Sie den Router für eine statische IP-Adresse konfigurieren möchten, beachten Sie die Seiten 19–22. Wenn Sie den Router für PPP konfigurieren möchten, beachten Sie die Seiten 23–26.
  • Page 49 All manuals and user guides at all-guides.com Folgender Bildschirm wird angezeigt: Klicken Sie auf Next. Legen Sie Ihr neues Kennwort fest. Sie haben die Möglichkeit, ein aus 8–30 Zeichen bestehendes Kennwort einzurichten. Klicken Sie auf Next.
  • Page 50 All manuals and user guides at all-guides.com Wählen Sie Ihre Zeitzone. Klicken Sie auf Next. Wählen Sie eine dieser Einstellungen. Wählen Sie Dynamic Address. Sollten Sie sich bei Auswahl der Einstellung nicht sicher sein, wenden Sie sich an Ihren Internet- Dienstanbieter (ISP).
  • Page 51 All manuals and user guides at all-guides.com Wenn Ihr Internet- dienstanbieter dynamische IP- Adressen verwendet, wird das folgende Fenster angezeigt: Geben Sie alle Werte ein, und wählen Sie in diesem Fenster den Verbindungstyp. Diese Daten erfahren Sie von Ihrem Internet- dienstanbieter oder Ihrer Telefon- gesellschaft.
  • Page 52 All manuals and user guides at all-guides.com Abschließend wird wieder die Registerkarte Home angezeigt. Klicken Sie auf Close.
  • Page 53 All manuals and user guides at all-guides.com Für statische IP-Adresse konfigurieren Klicken Sie auf Wizard. Folgender Bildschirm wird angezeigt: Klicken Sie auf Next.
  • Page 54 All manuals and user guides at all-guides.com Legen Sie Ihr neues Kennwort fest. Sie haben die Möglichkeit, ein aus 8–30 Zeichen bestehendes Kennwort einzurichten. Klicken Sie auf Next. Wählen Sie Ihre Zeitzone. Klicken Sie auf Next.
  • Page 55 All manuals and user guides at all-guides.com Wählen Sie Static Address. Sollten Sie sich bei Auswahl der Einstellung nicht sicher sein, wenden Sie sich an Ihren Internet- Dienstanbieter (ISP). Klicken Sie auf Next. Wenn Ihr Internet- dienstanbieter eine statische IP-Adresse vorgibt, wird das folgende Fenster angezeigt: Geben Sie alle Werte...
  • Page 56 All manuals and user guides at all-guides.com Die Einrichtung ist abgeschlossen. Klicken Sie auf Restart. Abschließend wird wieder die Registerkarte Home angezeigt. Klicken Sie auf Close.
  • Page 57 All manuals and user guides at all-guides.com Für PPP-Modus konfigurieren Klicken Sie auf Wizard. Folgender Bildschirm wird angezeigt: Klicken Sie auf Next.
  • Page 58 All manuals and user guides at all-guides.com Legen Sie Ihr neues Kennwort fest. Sie haben die Möglichkeit, ein aus 8–30 Zeichen bestehendes Kennwort einzurichten. Klicken Sie auf Next. Wählen Sie Ihre Zeitzone. Klicken Sie auf Next.
  • Page 59 All manuals and user guides at all-guides.com Wählen Sie eine dieser Einstellungen. Wählen Sie PPPoE/PPPoA. Sollten Sie sich bei Auswahl der Einstellung nicht sicher sein, wenden Sie sich an Ihren Internet- Dienstanbieter (ISP). Klicken Sie auf Next. Wenn Ihr Internetdienstanbieter den PPP-Modus (Point-to-Point Protocol) einsetzt,...
  • Page 60 All manuals and user guides at all-guides.com Die Einrichtung ist abgeschlossen. Klicken Sie auf Restart. Abschließend wird wieder die Registerkarte Home angezeigt. Klicken Sie auf Close.
  • Page 61 All manuals and user guides at all-guides.com Für Bridge-Modus konfigurieren Klicken Sie auf Wizard. Folgende Bildschirme werden angezeigt: Klicken Sie auf Next.
  • Page 62 All manuals and user guides at all-guides.com Legen Sie Ihr neues Kennwort fest. Sie haben die Möglichkeit, ein aus 8–30 Zeichen bestehendes Kennwort einzurichten. Klicken Sie auf Next. Wählen Sie Ihre Zeitzone. Klicken Sie auf Next.
  • Page 63 All manuals and user guides at all-guides.com Wählen Sie eine dieser Einstellungen. Wählen Sie Bridge Mode. Sollten Sie sich bei Auswahl der Einstellung nicht sicher sein, wenden Sie sich an Ihren Internet- Dienstanbieter (ISP). Klicken Sie auf Next. Wenn Ihr Internetdienstanbieter den Bridge-Modus einsetzt, wird das...
  • Page 64 All manuals and user guides at all-guides.com Die Einrichtung ist abgeschlossen. Klicken Sie auf Restart. Abschließend wird wieder die Registerkarte Home angezeigt. Klicken Sie auf Close.
  • Page 65 All manuals and user guides at all-guides.com Um eine Verbindung mit einem Netzwerk herzustellen, muss die Netzwerkkarte des Computers richtig konfiguriert sein. Klicken Sie mit der rechten Maustaste auf das Symbol LAN-Verbindung , und klicken Sie danach auf Eigenschaften Wählen Sie Eigenschaften.
  • Page 66 All manuals and user guides at all-guides.com Das Fenster Eigenschaften von Internetprotokoll (TCP/IP) wird Geben Sie alle Werte in angezeigt. diesem Fenster ein. Diese Daten erfahren Sie von Ihrem Internetdienstanbieter oder Ihrer Telefongesellschaft. Wählen Sie Folgende IP- Adresse verwenden. Geben Sie alle Werte in diesem Fenster ein.
  • Page 67 All manuals and user guides at all-guides.com Internetverbindung testen Klicken Sie auf Exit. Starten Sie Ihren Webbrowser erneut (Internet Explorer oder Netscape Navigator), und rufen Sie eine beliebige Webseite auf. Auf diese Weise können Sie prüfen, ob die Verbindung mit dem Internet funktioniert.
  • Page 68 Telefonische technische Unterstützung erhalten Sie montags bis donnerstags von 08.00 bis 19.00 Uhr, freitags von 08.00 bis 17.00 Uhr. Wenn Sie Kunde von D-Link außerhalb Deutschlands, Österreichs, der Schweiz und Osteuropas sind, wenden Sie sich bitte an die zuständige Niederlassung aus der Liste im Benutzerhandbuch.
  • Page 69 • Câble ADSL (câble téléphonique standard) Si l’un des éléments ci-dessus manque, contactez votre revendeur. ©2003 D-Link Systems, Tous droits réservés. Les marques sont la propriété de leurs propriétaires respectifs. Le logiciel et les spécifications sont susceptibles d’être modifiés sans préavis. Routeur ADSL DSL-514.
  • Page 70 DSL-514 à votre réseau Connectez le câble de l’adaptateur secteur à la prise située à l’arrière du DSL-514 et branchez l’adaptateur secteur sur une prise murale ou sur un bloc multiprise. Le voyant d’alimentation doit s’allumer. Branchez un câble Ethernet entre le port LAN 1 situé à l’arrière du DSL-514 et un port Ethernet disponible de l’adaptateur réseau de...
  • Page 71 Raccordement d’ordinateurs supplé -mentaires au routeur ADSL DSL-514 Avec des câbles Ethernet supplémentaires (CAT5 UTP), reliez chacun de vos ordinateurs en réseau aux ports LAN du DSL-514 à l’arrière du DSL-514. Une fois effectuées les opérations ci-dessus, votre réseau doit se présenter comme illustré...
  • Page 72 Configuration des paramètres IP Pour vous connecter au réseau, assurez-vous que l’adaptateur réseau de votre ordinateur est configuré correctement. Voici comment configurer l’adaptateur réseau pour obtenir automatiquement une adresse IP pour le routeur ADSL DSL-514. Sous Microsoft Windows XP Cliquez sur Démarrer.
  • Page 73 All manuals and user guides at all-guides.com Une boîte de dialogue apparaît avec une liste des éléments actuellement installés. Cliquez sur Protocole internet (TCP/IP) Cliquez sur Propriétés Sélectionnez Obtenir une adresse IP automatiquement Cliquez sur...
  • Page 74 All manuals and user guides at all-guides.com Sous Microsoft Windows 2000 Sélectionnez Démarrer > sélectionnez Paramètres > cliquez Panneau de configuration > Double-cliquez sur l’icône Connexions au réseau et accès à distance Double-cliquez sur l’icône Connexions au réseau et accès à distance Faites un clic droit sur l’icône...
  • Page 75 All manuals and user guides at all-guides.com Une boîte de dialogue apparaît avec une liste des éléments actuellement installés. Cliquez sur Protocole Internet (TCP/IP) Cliquez sur Propriétés Sélectionnez Obtenir une adresse IP automatiquement Cliquez sur Redémarrez votre ordinateur...
  • Page 76 All manuals and user guides at all-guides.com Sous Microsoft Windows ME Sélectionnez Démarrer > sélectionnez Paramètres > cliquez Panneau de configuration > Double-cliquez sur l’icône Réseau Double-cliquez Réseau La boîte de dialogue Réseau apparaît avec une liste des composants de réseau actuellement installés.
  • Page 77 All manuals and user guides at all-guides.com Sélectionnez Obtenir une adresse IP automatiquement Cliquez sur Redémarrez votre ordinateur...
  • Page 78 All manuals and user guides at all-guides.com Sous Microsoft Windows 98SE Sélectionnez Démarrer > sélectionnez Paramètres > cliquez Panneau de configuration > double-cliquez sur l’icône Réseau Double-cliquez Réseau La boîte de dialogue Réseau apparaît avec une liste des composants de réseau actuellement installés.
  • Page 79 All manuals and user guides at all-guides.com Sélectionnez Obtenir une adresse IP automatiquement Cliquez sur Redémarrez votre ordinateur...
  • Page 80 All manuals and user guides at all-guides.com Connexion au DSL-514 Ouvrez votre navigateur internet et tapez “http://192.168.0.2” dans la zone d’adresse URL. Appuyez sur Entrée ou Retour. L’écran de connexion apparaît. Lorsque vous vous connectez pour la première fois, votre nom d’utilisateur...
  • Page 81 All manuals and user guides at all-guides.com Une fois la connexion établie, l’écran d’accueil (Home) apparaît.
  • Page 82 All manuals and user guides at all-guides.com Utilisation de l’assistant de configuration Vérifiez les informations fournies par votre ISP. Pour configurer l’adresse IP dynamique, voir pages 15 à 19. Pour configurer l’adresse IP statique, votre pages 20 à 23. Pour configurer le type de PPP, voir pages 24 à 27. Pour configurer le mode pont, voir pages 28 à...
  • Page 83 All manuals and user guides at all-guides.com Les écrans suivants se succèdent. Cliquez sur Next Choisissez votre nouveau mot de passe (8 à 30 caractères). Cliquez sur Next...
  • Page 84 All manuals and user guides at all-guides.com Choisissez votre fuseau horaire. Cliquez sur Next Sélectionnez l’une de ces options. Sélectionnez Dynamic IP Address En cas de doute sur l’option à sélectionner, contactez votre fournisseur de services internet. Cliquez sur Next...
  • Page 85 All manuals and user guides at all-guides.com Si votre ISP veut une adresse IP dynamique, l’écran ci-contre apparaît : Entrez toutes les valeurs et sélectionnez le type de connexion. Ces données vous sont normalement fournies par votre ISP ou par votre opérateur téléphonique.
  • Page 86 All manuals and user guides at all-guides.com Vous revenez à l’écran d’accueil. Cliquez sur Close...
  • Page 87 All manuals and user guides at all-guides.com Configuration de l’adresse IP statique Cliquez sur Run Wizard Les écrans suivants se succèdent. Cliquez sur Next...
  • Page 88 All manuals and user guides at all-guides.com Choisissez votre nouveau mot de passe (8 à 30 caractères). Cliquez sur Next Choisissez votre fuseau horaire. Cliquez sur Next...
  • Page 89 All manuals and user guides at all-guides.com Sélectionnez Static IP Address En cas de doute sur l’option à sélectionner, contactez votre fournisseur de services internet. Cliquez sur Suivant Si votre ISP veut une adresse IP statique, l’écran ci-contre apparaît : Entrez toutes les valeurs et sélectionnez le type...
  • Page 90 All manuals and user guides at all-guides.com La configuration de votre routeur est terminée. Cliquez sur Restart Vous revenez à l’écran d’accueil. Cliquez sur Close...
  • Page 91 All manuals and user guides at all-guides.com Configuration du mode PPP Cliquez sur Run Wizard Les écrans suivants se succèdent. Cliquez sur Next...
  • Page 92 All manuals and user guides at all-guides.com Choisissez votre nouveau mot de passe (8 à 30 caractères). Cliquez sur Next Choisissez votre fuseau horaire. Cliquez sur Next...
  • Page 93 All manuals and user guides at all-guides.com Sélectionnez l’une de ces options. Sélectionnez PPPoE/PPPoA En cas de doute sur l’option à sélectionner, contactez votre fournisseur de services internet. Cliquez sur Suivant Si votre ISP utilise le mode PPP (protocole point à point), cet écran apparaît.
  • Page 94 All manuals and user guides at all-guides.com La configuration de votre routeur est terminée. Cliquez sur Restart Vous revenez à l’écran d’accueil. Cliquez sur Close...
  • Page 95 All manuals and user guides at all-guides.com Configuration du mode pont Cliquez sur Run Wizard Les écrans suivants se succèdent. Cliquez sur Next...
  • Page 96 All manuals and user guides at all-guides.com Choisissez votre nouveau mot de passe (8 à 30 caractères). Cliquez sur Next Choisissez votre fuseau horaire. Cliquez sur Next...
  • Page 97 All manuals and user guides at all-guides.com Sélectionnez l’une de ces options. Sélectionnez Bridge Mode En cas de doute sur l’option à sélectionner, contactez votre fournisseur de services internet. Cliquez sur Next Si votre ISP nécessite le mode pont, cet écran apparaît.
  • Page 98 All manuals and user guides at all-guides.com La configuration de votre routeur est terminée. Cliquez sur Restart Vous revenez à l’écran d’accueil. Cliquez sur Close...
  • Page 99 All manuals and user guides at all-guides.com Avant de vous connecter au réseau, vérifiez que la carte réseau de votre ordinateur est configurée correctement. Faites un clic droit sur Connexion au réseau local, puis sélectionnez Propriétés. Sélectionnez Propriétés Une boîte de dialogue apparaît avec une liste des éléments actuellement installés.
  • Page 100 All manuals and user guides at all-guides.com La fenêtre Propriétés de protocole internet (TCP/IP) apparaît. Entrez toutes les valeurs. Elles vous sont normalement fournies par votre ISP ou par votre opérateur téléphonique. Sélectionnez Utiliser l’adresse IP suivante Entrez toutes les valeurs et sélectionnez le type de connexion.
  • Page 101 All manuals and user guides at all-guides.com Pour tester votre connexion internet Cliquez sur Sortie Relancez votre navigateur internet (Internet Explorer ou Netscape Navigator), pour vous connecter à votre site web favori afin de tester votre connexion internet.
  • Page 102 Assistance technique Vous trouverez la documentation et les logiciels les plus récents sur le site web D-Link. Le service technique de D-Link est gratuit pour les clients aux Etats-Unis durant la période de garantie. Ceuxci peuvent contacter le service technique de D-Link par notre site internet ou par téléphone.
  • Page 103 Si falta alguno de los componentes, por favor contacte con su proveedor. ©2003 D-Link Systems, Inc. Reservados todos los derechos. Las marcas o marcas registradas son propiedad de los respectivos titulares. El software y las especificaciones pueden ser modificados sin previo aviso.DSL-514.ADSL Router...
  • Page 104 Introducir un extremo del cable Ethernet en el puerto LAN 1 situado en el panel trasero del DSL-514, y el otro extremo en un puerto Ethernet disponible del adaptador de red del ordenador que se utilice para configurar el DSL-514.
  • Page 105 ADSL DSL-514 Usando otros cables Ethernet (CAT5 UTP), conectar los ordenadores con Ethernet al puerto LAN que se encuentra en el panel trasero del DSL-514. Tras realizar los pasos indicados en esta guía de instalación rápida, la red tendrá una estructura similar a la de la imagen siguiente:...
  • Page 106 Antes de establecer la conexión con la red, debe verificarse que el adaptador de red del ordenador está correctamente configurado. A continuación se indica cómo configurar el adaptador de red para que obtenga automáticamente una dirección IP para el router ADSL DSL-514. Para Microsoft Windows XP Ir a Start >...
  • Page 107 All manuals and user guides at all-guides.com El cuadro de diálogo muestra una lista con todos los elementos de red que se encuentran instalados. Hacer click en Internet Protocol (TCP/IP) Hacer click en Properties Seleccionar que se pueden obtener los parámetros IP asignados automáticamente.
  • Page 108 All manuals and user guides at all-guides.com Para Microsoft Windows 2000 Ir a Start > seleccionar Setting > hacer click en Control Panel > hacer doble click en el icono Network Connection and Dial- Up Connections. Hacer doble click en Network Connection and Dial-Up Connections...
  • Page 109 All manuals and user guides at all-guides.com El cuadro de diálogo muestra una lista con todos los elementos de red que se encuentran instalados. Hacer click en Internet Protocol (TCP/IP) Hacer click en Properties Seleccionar que se pueden obtener los parámetros IP asignados automáticamente.
  • Page 110 All manuals and user guides at all-guides.com Para Microsoft Windows ME Ir a Start > seleccionar Setting > hacer click en Control Panel > hacer doble click en el icono Network. Hacer doble click Network El cuadro de diálogo Network muestra una lista con todos los componentes de red que se encuentran instalados.
  • Page 111 All manuals and user guides at all-guides.com Seleccionar que se pueden obtener los parámetros IP asignados automáticamente. Seleccionar Obtain an IP address automatically Hacer click en Reiniciar el ordenador...
  • Page 112 All manuals and user guides at all-guides.com Para Microsoft Windows 98SE Ir a Start > seleccionar Setting > hacer click en Control Panel > hacer doble click en el icono Network. Hacer doble click Network El cuadro de diálogo Network muestra una lista con todos los componentes de red que se encuentran instalados.
  • Page 113 All manuals and user guides at all-guides.com Seleccionar que se pueden obtener los parámetros IP asignados automáticamente. Seleccionar Obtain an IP address automatically Hacer click en Reiniciar el ordenador...
  • Page 114 All manuals and user guides at all-guides.com Entrar en el DSL-514 Abrir el navegador Web y escribir “http://192.168.0.2” el cuadro de la dirección URL. Después presionar la tecla Enter o Return. Se mostrará la ventana de entrada al sistema. Cuando se entre por mi...
  • Page 115 All manuals and user guides at all-guides.com Una vez dentro, se mostrará la pantalla Home.
  • Page 116 All manuals and user guides at all-guides.com Usar el asistente de configuración Verificar la información ISP. Si se configura para una dirección IP dinámica, véase páginas 14-18. Si se configura para una dirección IP estática, véase páginas 19-22. Si se configura para modo PPP, véase páginas 23-26. Si se configura para modo puente, véase páginas 27-32.
  • Page 117 All manuals and user guides at all-guides.com Se mostrará la siguiente pantalla. Hacer click Next Introducir la nueva clave de acceso. La clave de acceso puede tener de 8 a 30 caracteres. Hacer click Next...
  • Page 118 All manuals and user guides at all-guides.com Seleccionar la zona horaria. Hacer click Next Seleccionar uno de estos parámetros. Seleccionar Dynamic IP Address Si no se sabe con certeza qué parámetro seleccionar, se debe contactar con el proveedor de servicios Internet. Hacer click Next...
  • Page 119 All manuals and user guides at all-guides.com Si el ISP requiere una Dynamic IP Address, se mostrará esta pantalla: Introducir todos los valores y seleccionar el tipo de conexión. Estos datos son los del ISP o de la compañía telefónica. Hacer click en Next No deben usarse los...
  • Page 120 All manuals and user guides at all-guides.com Se volverá a la ficha Home. Hacer click Close...
  • Page 121 All manuals and user guides at all-guides.com Configuración para dirección IP estática Hacer click en Run Wizard Se mostrará la siguiente pantalla. Hacer click Next...
  • Page 122 All manuals and user guides at all-guides.com Introducir la nueva clave de acceso. La clave de acceso puede tener de 8 a 30 caracteres. Hacer click Next Seleccionar la zona horaria. Hacer click Next...
  • Page 123 All manuals and user guides at all-guides.com Seleccionar Static IP Address Si no se sabe con certeza qué parámetro seleccionar, se debe contactar con el proveedor de servicios Internet. Hacer click en Next Si el ISP requiere una Static IP Address, se mostrará...
  • Page 124 All manuals and user guides at all-guides.com La configuración ha finalizado. Hacer click Restart Se volverá a la ficha Home. Hacer click Close...
  • Page 125 All manuals and user guides at all-guides.com Configuración para modo PPP Hacer click en Run Wizard Se mostrará la siguiente pantalla. Hacer click Next...
  • Page 126 All manuals and user guides at all-guides.com Introducir la nueva clave de acceso. La clave de acceso puede tener de 8 a 30 caracteres. Hacer click Next Seleccionar la zona horaria. Hacer click Next...
  • Page 127 All manuals and user guides at all-guides.com Seleccionar uno de estos parámetros. Seleccionar PPPoE/PPPoA Si no se sabe con certeza qué parámetro seleccionar, se debe contactar con el proveedor de servicios Internet. Hacer click en Next Si el ISP utiliza PPP Mode (Point-to- Point Protocol), se mostrará...
  • Page 128 All manuals and user guides at all-guides.com La configuración ha finalizado. Hacer click Restart Se volverá a la ficha Home. Hacer click Close...
  • Page 129 All manuals and user guides at all-guides.com Configuración para modo puente Hacer click en Run Wizard Se mostrarán las siguiente pantallas. Hacer click Next...
  • Page 130 All manuals and user guides at all-guides.com Introducir la nueva clave de acceso. La clave de acceso puede tener de 8 a 30 caracteres. Hacer click Next Seleccionar la zona horaria. Hacer click Next...
  • Page 131 All manuals and user guides at all-guides.com Seleccionar uno de estos parámetros. Seleccionar Bridge Mode Si no se sabe con certeza qué parámetro seleccionar, se debe contactar con el proveedor de servicios Internet. Hacer click Next Si el ISP requiere Bridge Mode, se mostrará...
  • Page 132 All manuals and user guides at all-guides.com La configuración ha finalizado. Hacer click Restart Se volverá a la ficha Home. Hacer click Close...
  • Page 133 All manuals and user guides at all-guides.com Antes de establecer la conexión con la red, debe verificarse que el adaptador de red del ordenador está correctamente configurado. Hacer doble click en el icono Local Area Connection, y seleccionar Properties. Seleccionar Properties El cuadro de diálogo muestra una lista con todos los...
  • Page 134 All manuals and user guides at all-guides.com Se muestra la pantalla Network . Introducir (TCP/IP) Properties todos los valores. Estos datos son los del ISP o de la compañía telefónica.. Seleccionar Use the following IP address Introducir todos los valores. Estos datos son los del ISP o de la compañía telefónica.
  • Page 135 All manuals and user guides at all-guides.com Probar la conexión a Internet Hacer click para salir Después reiniciar el navegador Web (p. ej., Internet Explorer o Netscape Navigator), para ir al sitio Web favorito Web y así probar la conexión a Internet.
  • Page 136 All manuals and user guides at all-guides.com Asistencia Técnica Puede encontrar el software más reciente y documentación para el usuario en el sitio web de D-Link . D- Link ofrece asistencia técnica gratuita para clientes dentro de España durante el periodo de garantía del producto.
  • Page 137 Provider (ISP). Per configurare il dispositivo, si consiglia di utilizzare il computer connesso al router ADSL DSL-514. Il router DSL-514 funge da server DHCP e assegna automaticamente tutte le impostazioni IP necessarie. Consultare il manuale rapido d’installazione o il manuale utente contenuto nel CD-ROM, per impostare gli adattatori di rete in modo che ottengano automaticamente gli indirizzi IP.
  • Page 138 All manuals and user guides at all-guides.com ©2003 D-Link Systems, Inc. Tutti i diritti sono riservati. I marchi e i marchi registrati sono dei rispettivi proprietari. Software e specifiche soggetti a cambiamenti senza preavviso. Router ADSL DSL-514...
  • Page 139 514 alla rete Connettere il trasformatore al relativo connettore posto sul pannello posteriore del dispositivo DSL-514 e alla presa a muro. Il LED Power si ACCENDE per indicare il corretto funzionamento. Collegare un’estremità del cavo Ethernet alla porta LAN 1 posta sul pannello posteriore del dispositivo DSL-514 e connettere l’altra...
  • Page 140 Utilizzando cavi Ethernet (CAT5 UTP) aggiuntivi, collegare i computer abilitati per la tecnologia Ethernet alle porte LAN poste sul pannello posteriore del dispositivo DSL-514. Al termine della procedura descritta nel presente Manuale rapido d’installazione, la rete assume un aspetto simile a quello illustrato in...
  • Page 141 Per consentire il collegamento alla rete, verificare che l’adattatore di rete del computer sia configurato correttamente. In seguito viene descritta la procedura per configurare l’adattatore di rete in modo che ottenga automaticamente l’indirizzo IP dal router ADSL DSL-514. Microsoft Windows XP Selezionare Start >...
  • Page 142 All manuals and user guides at all-guides.com Il sistema visualizza una finestra di dialogo con l’elenco dei componenti di rete attualmente installati. Cliccare su Internet Protocol (TCP/IP) Cliccare su Properties Selezionare la configurazione automatica delle impostazioni Selezionare Obtain an IP address automatically Cliccare...
  • Page 143 All manuals and user guides at all-guides.com Microsoft Windows 2000 Selezionare Start > Setting. Cliccare su Control Panel. Fare doppio clic sull’icona Network Connection and Dial-Up Connections Fare doppio clic su Network Connection and Dial-Up Connections Col tasto destro del mouse, cliccare sull’icona Local Area...
  • Page 144 All manuals and user guides at all-guides.com Il sistema visualizza una finestra di dialogo con l’elenco dei componenti di rete attualmente installati. Cliccare su Internet Protocol (TCP/IP) Cliccare su Properties Selezionare la configurazione automatica delle impostazioni Selezionare Obtain an IP address automatically Cliccare Riavviare il...
  • Page 145 All manuals and user guides at all-guides.com Microsoft Windows ME Selezionare Start > Setting. Cliccare su Control Panel. Fare doppio clic sull’icona Network Fare doppio clic su Network Il sistema visualizza la finestra di dialogo Network con l’elenco dei componenti di rete installati. Selezionare la voce associata alla scheda o all’adattatore di rete Cliccare su...
  • Page 146 All manuals and user guides at all-guides.com Selezionare la configurazione automatica delle impostazioni Selezionare Obtain an IP address automatically Cliccare Ravviare il computer...
  • Page 147 All manuals and user guides at all-guides.com Microsoft Windows 98SE Selezionare Start > Setting. Cliccare su Control Panel. Fare doppio clic sull’icona Network Fare doppio clic su Network Il sistema visualizza la finestra di dialogo Network con l’elenco dei componenti di rete installati. Selezionare la voce associata alla scheda o all’adattatore di rete Cliccare su...
  • Page 148 All manuals and user guides at all-guides.com Selezionare la configurazione automatica delle impostazioni Selezionare Obtain an IP address automatically Cliccare Riavviare il computer...
  • Page 149 All manuals and user guides at all-guides.com Login al router DSL-514 Aprire il browser web e digitare “http://192.168.0.2” nel campo URL. Premere Enter o Invio. Il sistema visualizza la finestra di login Al primo login, nome utente e la password sono: Nome utente: “admin”...
  • Page 150 All manuals and user guides at all-guides.com Dopo il login, il sistema visualizza la finestra Home.
  • Page 151 All manuals and user guides at all-guides.com Utilizzo del programma Setup Wizard Verifica delle informazioni relative all’ISP, Per configurazioni con indirizzo IP dinamico, consultare pag. 14-18. Per configurazioni con indirizzo IP statico, consultare pag. 19-22. Per configurazioni PPP, consultare pag.23-26. Per configurazioni Bridge Mode, consultare pag.27-32.
  • Page 152 All manuals and user guides at all-guides.com Il sistema visualizza la seguente finestra Cliccare su Next Configurazione della nuova password. È possibile creare una password di 8~30 caratteri. Cliccare su Next...
  • Page 153 All manuals and user guides at all-guides.com Selezionare il fuso orario. Cliccare su Next Selezionare una delle presenti impostazioni Selezionare Dynamic IP Address In caso di dubbio sulle opzioni da selezionare contattare l’Internet Service Provider. Cliccare su Next...
  • Page 154 All manuals and user guides at all-guides.com Se l’ISP richiede un Indirizzo IP Dinamico, viene visualizzata la presente finestra: Inserire tutti i valori e selezionare il tipo di connessione. Richiedere i dati all’ISP o alla società telefonica. Cliccare Next Non utilizzare i numeri riportati in questi campi che sono esclusivamente esempi.
  • Page 155 All manuals and user guides at all-guides.com Il sistema torna alla scheda Home. Cliccare su Close...
  • Page 156 All manuals and user guides at all-guides.com Configurazione con indirizzo IP statico Cliccare su Run Wizard Il sistema visualizza la presente finestra . Cliccare su Next...
  • Page 157 All manuals and user guides at all-guides.com Configurazione della nuova password. È possibile creare una password di 8~30 caratteri. Cliccare su Next Selezionare il fuso orario. Cliccare su Next...
  • Page 158 All manuals and user guides at all-guides.com Selezionare Static IP Address In caso di dubbio sulle impostazioni da utilizzare, contattare l’Internet Service Provider. Cliccare su Next Se l’ISP richiede un indirizzo IP statico, appare la seguente finestra. Inserire tutti i valori e selezionare il tipo di connessione.
  • Page 159 All manuals and user guides at all-guides.com La configurazione è terminata. Cliccare su Restart Viene visualizzata nuovamente la scheda Home. Cliccare su Close...
  • Page 160 All manuals and user guides at all-guides.com Configurazione per la modalità PPP Cliccare su Run Wizard Il sistema visualizza la presente finestra Cliccare su Next...
  • Page 161 All manuals and user guides at all-guides.com Configurazione della nuova password. È possibile creare una password di 8~30 caratteri. Cliccare su Next Selezionare il fuso orario. Cliccare su Next...
  • Page 162 All manuals and user guides at all-guides.com Selezionare una delle presenti impostazioni Selezionare PPPoE/PPPoA In caso di dubbio sulle impostazioni da utilizzare, contattare l’Internet Service Provider. Cliccare su Next Se l’ISP utilizza la modalità PPP (Point- to-Point Protocol), viene visualizzata la presente finestra .
  • Page 163 All manuals and user guides at all-guides.com La configurazione è terminata. Cliccare su Restart Viene visualizzata nuovamente la scheda Home. Cliccare su Close...
  • Page 164 All manuals and user guides at all-guides.com Configurazione per la modalità Bridge Cliccare su Run Wizard Il sistema visualizza la seguente finestra. Cliccare su Next...
  • Page 165 All manuals and user guides at all-guides.com Configurazione della nuova password. È possibile creare una password di 8~30 caratteri. Cliccare su Next Selezionare il fuso orario. Cliccare su Next...
  • Page 166 All manuals and user guides at all-guides.com Selezionare una delle presenti impostazioni. Selezionare Bridge Mode In caso di dubbio sulle impostazioni da utilizzare, contattare l’Internet Service Provider. Cliccare su Next Se l’ISP richiede la modalità Bridge, viene visualizzata la presente finestra. Inserire tutti i valori e selezionare il tipo di connessione.
  • Page 167 All manuals and user guides at all-guides.com La configurazione è terminata Cliccare su Restart Viene visualizzata nuovamente la scheda Home. Cliccare su Close...
  • Page 168 All manuals and user guides at all-guides.com Per consentire la connessione alla rete, verificare che l’adattatore del computer sia configurato correttamente. Col tasto destro del mouse, cliccare sull’icona Local Area Connection selezionare Properties. Selezionare Properties Il sistema visualizza la finestra di dialogo con l’elenco dei componenti di rete installati.
  • Page 169 All manuals and user guides at all-guides.com Il sistema visualizza la finestra . Inserire Network (TCP/IP) Properties tutti i valore richiesti nella finestra. Richiedere i dati all’ISP o alla società telefonica. Selezionare Use the following IP address Inserire tutti i valori. Richiedere i dati all’ISP o alla società...
  • Page 170 All manuals and user guides at all-guides.com Test della connessione a Internet Cliccare Exit Rilanciare il browser (per esempio, Internet Explorer o Netscape Navigator), e connettersi al proprio sito preferito per verificare la connessione.
  • Page 171 Le ultime versioni del software e la documentazione aggiornata sono disponibili al sito D-Link. D-Link fornisce un supporto tecnico gratuito ai clienti residenti in Italia per tutto il periodo di validità della garanzia del prodotto. I clienti italiani possono contattare il supporto tecnico D-Link...
  • Page 172 •ADSL кабель (стандартный телефонный кабель) Если что-либо из перечисленного отсутствует, обратитесь к вашему поставщику. ©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DSL-514.ADSL Router...
  • Page 173 All manuals and user guides at all-guides.com Подключение ADSL маршрутизатора DSL-514 к сети Вставьте адаптер питания в гнездо на задней панели DSL-514, и включите другой его конец в настенную розетку питания. Индикатор Power загорится, что говорит о правильной работе. Вставьте один конец кабеля Ethernet в порт LAN 1 на задней...
  • Page 174 компьютеров к ADSL маршрутизатору DSL-514 Используя дополнительные кабели Ethernet (CAT5 UTP), подключите компьютеры с сетевыми адаптерами Ethernet к LAN порту DSL-514, который находится на задней панели маршрутизатора. Когда Вы пройдете все шаги, описанные в руководстве по быстрой установке, подключенная сеть будет выглядеть, как показано на...
  • Page 175 All manuals and user guides at all-guides.com Конфигурирование настроек IP Убедитесь, что сетевой адаптер компьютера правильно сконфигурирован. Здесь показана настройка сетевого адаптера для автоматического получения IP адреса от ADSL маршрутизатора DSL-514. Для Microsoft Windows XP Нажмите Пуск > выберите Настройка...
  • Page 176 All manuals and user guides at all-guides.com Диалоговое окно покажет список установленных компонентов сети. Выберите Internet Protocol (TCP/IP) Нажмите Выберите автоматическое получение IP адреса. Выберите Получить IP адрес автоматически Нажмите...
  • Page 177 All manuals and user guides at all-guides.com Для Microsoft Windows 2000 Нажмите Пуск > выберите Настройка > щелкните на Панель Управления > дважды щелкните на иконке Сеть и удаленный доступ к сети Дважды щелкните на Сеть и удаленный доступ к сети...
  • Page 178 All manuals and user guides at all-guides.com Диалоговое окно покажет список установленных компонентов сети. Выберите Internet Protocol (TCP/IP) Нажмите Выберите автоматическое получение IP адреса. Выберите Получить IP адрес автоматически Нажмите Перезагрузите компьютер...
  • Page 179 All manuals and user guides at all-guides.com Для Microsoft Windows ME Нажмите Пуск > выберите Настройка > щелкните на Панель Управления > дважды щелкните на иконке Сеть Дважды щелкните на Сеть Диалоговое окно Сеть покажет список установленных компонентов сети. Выберите из списка вашу сетевую...
  • Page 180 All manuals and user guides at all-guides.com Выберите автоматическое получение IP адреса. Выберите Получить IP адрес автоматически Нажмите Перезагрузите компьютер...
  • Page 181 All manuals and user guides at all-guides.com Для Microsoft Windows 98SE Нажмите Пуск > выберите Настройка > щелкните на Панель Управления > дважды щелкните на иконке Сеть Дважды щелкните на Сеть Диалоговое окно Сеть покажет список установленных компонентов. Выберите из списка вашу сетевую...
  • Page 182 All manuals and user guides at all-guides.com Выберите автоматическое получение IP адреса. Выберите Получить IP адрес автоматически Нажмите Перезагрузите компьютер...
  • Page 183 All manuals and user guides at all-guides.com Регистрация на DSL-514 Откройте Web- браузер и наберите “http://192.168.0.2” в строке адреса. Затем нажмите клавишу Enter или Return. Появится окно регистрации. При регистрации в первый раз имя пользователя и пароль будут следующими: User name: “admin”...
  • Page 184 All manuals and user guides at all-guides.com Как только Вы зарегистрировались, появится окно Home.
  • Page 185 All manuals and user guides at all-guides.com Использование мастера установки Уточните информацию у провайдера Интернет (ISP) При настройке динамического IP адреса, обратитесь к страницам 14-18. При настройке статического IP адреса, обратитесь к страницам 19-22. При настройке типа PPP, обратитесь к страницам 23-26. При...
  • Page 186 All manuals and user guides at all-guides.com Появится следующее окно. Нажмите Next Установите новый пароль. Вы можете установить пароль длиной 8~30 символов. Нажмите Next...
  • Page 187 All manuals and user guides at all-guides.com Выберите свой часовой пояс. Нажмите Next Выберите одну из этих установок. Выберите Dynamic IP Address Если Вы не уверены, какую установку выбрать, пожалуйста, свяжитесь со своим провайдером Интернет. Нажмите Next...
  • Page 188 All manuals and user guides at all-guides.com Если провайдер Интернет требует настройки динамического IP адреса, появится следующее окно: Введите в окне все значения и выберите тип подключения. Уточните эту информацию у провайдера Интернет. Next Нажмите Не используйте значения, указанные в этих полях. Они показаны...
  • Page 189 All manuals and user guides at all-guides.com Вы возвратитесь к закладке Home. Нажмите Close...
  • Page 190 All manuals and user guides at all-guides.com Настройка статического IP адреса Нажмите Run Wizard Появится следующее окно. Нажмите Next...
  • Page 191 All manuals and user guides at all-guides.com Установите новый пароль. Вы можете установить пароль длиной 8~30 символов. Нажмите Next Выберите свой часовой пояс. Нажмите Next...
  • Page 192 All manuals and user guides at all-guides.com Выберите Static IP Address Если Вы не уверены, какую установку выбрать, пожалуйста, свяжитесь со своим провайдером Интернет. Нажмите Next Если провайдер Интернет требует настройки статического IP адреса, появится следующее окно: Введите в окне все значения...
  • Page 193 All manuals and user guides at all-guides.com Установка завершена. Нажмите Restart Вы возвратитесь к закладке Home. Нажмите Close...
  • Page 194 All manuals and user guides at all-guides.com Настройка режима PPP Нажмите Run Wizard Появится следующее окно. Нажмите Next...
  • Page 195 All manuals and user guides at all-guides.com Установите новый пароль. Вы можете установить пароль длиной 8~30 символов. Нажмите Next Выберите свой часовой пояс. Нажмите Next...
  • Page 196 All manuals and user guides at all-guides.com Выберите одну из этих установок. Выберите PPPoE/PPPoA Если Вы не уверены, какую установку выбрать, пожалуйста, свяжитесь со своим провайдером Интернет. Нажмите Next Если провайдер Интернет требует настройки режима PPP (Point-to-Point Protocol), появится следующее окно: Введите...
  • Page 197 All manuals and user guides at all-guides.com Установка завершена. Нажмите Restart Вы возвратитесь к закладке Home. Нажмите Close...
  • Page 198 All manuals and user guides at all-guides.com Настройка режима моста Нажмите Run Wizard Появится следующее окно. Нажмите Next...
  • Page 199 All manuals and user guides at all-guides.com Установите новый пароль. Вы можете установить пароль длиной 8~30 символов. Нажмите Next Выберите свой часовой пояс. Нажмите Next...
  • Page 200 All manuals and user guides at all-guides.com Выберите одну из этих установок. Выберите Bridge Mode Если Вы не уверены, какую установку выбрать, пожалуйста, свяжитесь со своим провайдером Интернет. Нажмите Next Если провайдер Интернет требует настройки режима Bridge Mode появится следующее окно: Введите...
  • Page 201 All manuals and user guides at all-guides.com Установка завершена. Нажмите Restart Вы возвратитесь к закладке Home. Нажмите Close...
  • Page 202 All manuals and user guides at all-guides.com Для подключения к сети, убедитесь, что сетевой адаптер компьютера сконфигурирован правильно. Правой кнопкой мыши нажмите на иконке Подключение к локальной сети, и затем выберите Свойства. Выберите Диалоговое окно покажет список установленных компонентов сети. Нажмите...
  • Page 203 All manuals and user guides at all-guides.com Появится окно Свойства: Протокол Интернет (TCP/IP) Введите в окне все значения. Уточните данные у провайдера Интернет (ISP). Выберите в окне все значения. Уточните эти данные у провайдера Интернет. Нажмите Не используйте значения, указанные в этих...
  • Page 204 All manuals and user guides at all-guides.com Проверка подключения к Интернет Нажмите Exit Перезапустите Web- браузер (Internet Explorer или Netscape Navigator), свяжитесь с любимым Web- сайтом для тестирования подключения к Интернет.
  • Page 205 D-Link D-Link обеспечивает бесплатную техническую поддержку клиентов в течение гарантийного срока изделия. Клиенты могут связаться со службой технической поддержки D-Link через наш web-сайт, или по телефону. Телефоны службы технической поддержки D-Link: +7 (095) 744 00 99 Техническая Поддержка D-Link через Internet:...