Helios AIR1-AAD Série Notice De Montage Et D'entretien page 12

Installation and Operating Instructions
EN
Weather protection cover AIR1-AAD
4. Place the parts of the weather protection cover on the unit, see Fig. 12.
5. Align the weather protection cover with the sides and back of the unit, see Fig. 13.
6. There is a recess in the weather protection covers for the AIR1 ventilation units XH 4500-8500 and RH 5000-15000
for the main switch cable. Use this recess for the protective tubing of the main switch cable, see Fig. 14.
7. Place weather protection cover on the unit on the sealing tape and attach to the unit with the sheet metal parts
(screw to unit profile with selftapping screws), see Fig. 15.
Fig.12
Fig.13
Fig.14
5