Helios AIR1-AAD Série Notice De Montage Et D'entretien page 11

Installation and Operating Instructions
Weather protection cover AIR1-AAD
3. Place weather protection cover on the unit on the sealing tape and attach to the unit with the sheet metal parts
(screw to unit profile with selftapping screws), see Fig. 8.
4. Seal the edge of the terminal box cover with silicone, see Fig. 9.
– Installation Weather protection cover AIR1-AAD XH 3500-8500 and AIR1-AAD RH 5000-15000
1. Ensure that the module units are properly fixed together.
2. Remove screw covers at top of unit before installing the weather protection cover, see Fig. 10.
3. Apply sealing tape ( ) at top of unit, see Fig. 11.
Fig.7
Sealing
tape
Fig.9
Fig.10
4
EN
Fig.8
Fig.11