Dacor Distinctive DTO127 Instructions D’installation page 10

Verify the Package Contents
Verify that all the components below have been provided. If any item is missing or damaged, please contact your dealer
immediately. Do not install a damaged or incomplete appliance. Make sure that you have everything necessary to ensure
proper installation before proceeding.
• Use and care manual
• Mounting screws, wood, #6 X ¾, Dacor PN 83331,
4 for single ovens, 6 for double ovens
• Standard oven racks (single ovens come with 2,
double ovens come with 4)
• GlideRack™ oven rack (single ovens come with 1,
double ovens come with 2)
Remove the oven door(s)
Remove the door(s) to reduce weight and make the
oven easier to lift:
WARNING
• Do not attempt to disengage the hinge catches with
the door removed from the oven. The hinge springs
could release, causing personal injury.
• Do not lift or carry the oven door by the door handle.
• On double ovens, remove the bottom door first to
reduce the chance of damage.
Removing the Oven Door(s)
1. Open the door to its fully opened position.
2. Using a flat blade screwdriver, rotate the catch over the
retaining arm on each hinge.
3. Lift the oven door to about a 15° angle from the vertical
position.
4. Hold the door with both hands just below the handle
and pull it away from the oven while continuing to lift.
8
Installation Instructions
• Dacor Stainless Steel Cleaner
(stainless steel models only)
• Meat probe
Gripping
point
Catch
Retaining
arm
Steps 1 and 2
Gripping
point
Steps 3 and 4