Chicago Pneumatic S-type Instructions Du Produit page 6

Operation
Operation
Operating the tool with reaction bar
1. Attach the tool to the application.
2.
WARNING Be aware that the reaction bar will turn in the opposite direction to the tool.
By using the reverse lever, the tool can be operated in both clockwise and counter-clockwise directions.
3. Make sure the tool is placed in the correct position on the work surface as described in the picture. The end sur-
face of the reaction bar and the socket/nut must be aligned. Make sure that the foot of the reaction bar hits the
center of the nut that takes the reaction force.
4.
WARNING Never put your hand on or close to the reaction bar while the tool is being used.
6
EN
© Chicago Pneumatic - 6159923720
Reaction Bar