Bestron AKM1600S Mode D'emploi page 44

OPERATION - Using the grinder to grind meat
1. Remove the cover (5) from the mixer head (6).
2. Place the filling funnel (24) of the meat grinder in a 45º angle onto the mixer head connection (7).
3. Turn the filling funnel upwards until it clicks into place.
4. Select the desired grinding disc: fine (27), medium (28) or coarse (29).
5. Assemble the parts of the meat grinder in the appropriate order and as illustrated above.
6. Place a bowl, plate or tray underneath the filling funnel to catch the ground meat.
7. Place the filling tray (23) onto the funnel.
8. Turn the speed switch (15) to the desired setting. The grinding spiral (25) will begin to turn.
9. Insert the meat through the filling and into the opening of the funnel and press it with the pusher (22). Do
not push it harder than strictly necessary.
10. Switch off the appliance by turning the speed switch onto the 'OFF' position.
11. Remove the funnel by pressing the connection unlocker (8) forward en twisting the funnel clockwise in
a 45º angle.
ATTENTION:
• Do not use the grinder and kitchen machine simultaneously, this overloads the motor.
TIPS
• Use only the supplied pusher (22) to push food into the appliance.
• Cut all foods into pieces that fit into the opening. Meats without bones, tendons and fat are recommended.
• Do not use the appliance consecutively for more than 10 minutes. Wait 20 minutes before switching on
the aplliance again.
44
EN