P220 - Harman AKG P120 Mode D'emploi

P220

Type:
Polar pattern:
Sensitivity:
Frequency response:
Electrical impedance:
Recommended load impedance:
Equivalent noise level to IEC 60268-4:
Signal to noise:
Max. SPL for 0.5% THD:
Temperature range:
Phantom powering:
Current consumption:
Connector:
Diameter:
Length:
Net weight:
Bass cut pad:
Preattenuation pad:
Frequency Response
This product corresponds to the standards stated in the Declaration of Conformity. You can request the
Declaration of Conformity by e-mail from sales@akg.com.
P120 P220
1" large-diaphragm, true condenser pressure-gradient
microphone
cardioid
20 mV/Pa (-34 dBV)
20 Hz to 20 kHz
(see frequency response trace)
≤ 200 ohms
≥ 1000 ohms
16 dB(A)
78 dB(A) re 1 Pa
135 / 155 dB SPL (0 / -20 dB)
-10 °C to +60 °C (14 °F - 140 °F)
48 V ±4 V to IEC 61938
≤ 3 mA
3-pin XLR (pin 2 hot)
54 mm (2.13 in.)
165 mm (6.5 in.)
530 g (18.7 oz.)
300 Hz, 12 dB/octave
-20 dB
Technical data
Polar Diagram
21