Connecting To Audio Equipment; General; Pinout; Connecting The Microphone - Harman AKG P120 Mode D'emploi

Connecting to Audio Equipment

3 Connecting to Audio Equipment

General

Pinout

Connecting the
Microphone
16
The microphone uses a condenser transducer designed for 48-volt phantom
powering to IEC 61938 and needs an external power supply.
The microphone provides a balanced output on a 3-pin male XLR connector:
Pin 1: ground
Pin 2: hot
Pin 3: cold
Figure 2: Connecting to a balanced input with phantom power
1) Use an XLR cable to connect the microphone to a balanced XLR input
with phantom power.
2) Switch the phantom power on. (Refer to the user manual of the unit to
which you connected your microphone.)
P120 P220