MSW Motor Technics S-POWER-P&P7 Manuel D'utilisation page 37

Wi-Fi mode
Figure 1
1) Open the APP, click "+" in the upper right corner, and then click Scan to add devices.
2) When the device appears on the search page, click "Add", as shown in Figure 2.
*If the device cannot be searched, please check whether the inverter is too far away from the mobile
phone.
Figure 3
EN
A- Click "Scan"
B- Scan the QR code
A- Select "2.4G SSID"
B- Enter "Password"
C- Added successfully
D- Click "Done"
Figure 2
Figure 4