Elica CT35 PRO Prescriptions De Montage Et Mode D'emploi page 9

MAINTENANCE
An accurate maintenance guarantees a good
functioning and a long-lasting performance.
Pay attention to the grease filters.
The filter can be removed by pushing it towards
the back part of the hood and rotating the filter
downwards, releasing it from its seat (fig. 1). To
insert the filter, just perform the opposite opera-
tion.
The grease filter can be washed by hand or in the
dishwasher.
After releasing the steel filters, hold the liquid wa-
ste tray in one hand and, with the other hand, lo-
osen the knobs as indicated in fig. 2, let the liquid
waste tray swipe down taking care not to pour
any liquids.
For cleaning, use ONLY a damp cloth with neutral
liquid detergents.
DO NOT USE TOOLS OR INSTRUMENTS FOR
CLEANING!
Avoid using abrasive products.
DO NOT USE ALCOHOL.
The replacement of the power cable must be car-
ried out by authorized staff.
Replacement of the LED bar:
By using an appropriate tool, remove the LED
bar from its seat (Fig. 8), disconnect it elec-
tronically through the appropriate connec-
tor, then replace it with a LED bar having the
same features.
9