Technical Data; General Installation Instructions - Westfalia 313 082 600 001 Notice De Montage Et D'utilisation

Technical Data:

The tested D-value is 9,1 kN. This corresponds, for example, to a towed weight of 1700 kg and a gross vehicle weight of 2050
kg. The tested trailer nose weight is 75 kg. For driving, the data of the vehicle manufacturer with regard to the towed weight and
trailer nose weight are decisive, whereby the tested values of the CBB may not be exceeded.
Notes:
The CBB is a safety part and may only be mounted by specially trained personnel. Should spare parts be required, these may
also only be mounted on the undamaged original-equipment part by specially trained personnel.
No changes or modifications to the CBB are permitted.
When driving with a trailer, observe the driving instructions in the vehicle manufacturer's operating instructions.
The trailer must be equipped with an appropriate towing coupling ball.
If installing the CBB necessitates the removal of the towing eye, the CBB serves as a replacement, provided the permissible
towed weight is not exceeded and the towing takes place on normal roads.
The ball and coupling must be kept clean and greased.
Important: When using track stabilising devices, e.g. the Westfalia "SSK", the coupling ball must be grease-free.
Follow the instructions in the operating instructions.
Check the ball diameter from time to time.
As soon as a diameter of 49.0 mm is reached at any given point, the CBB may no longer be used for safety reasons.
The fixing points specified as standard must be observed.
National guidelines concerning official approval of auxiliaries must be observed.
These installation and operating instructions must be enclosed with the vehicle papers.

General Installation Instructions:

If present, remove insulating compound and/or underseal in the area of the CBB contact surfaces. Coat bare bodywork with
anti-corrosion paint.
Mount 7-pin electrical system as per DINV 72570.
Mount 13-pin electrical system as per ISO 11446.
This CBB including all mounting parts weighs 18,6 kg. Please take into account that the curb weight of your vehicle is increased
by this amount after mounting the CBB.
Available Spare Parts for Coupling Ball with Bracket
Item Spare Part No.
913 082 650 001
6,7 913 082 650 002
for veh. up to approx. Sep. 93
3,4, 913 082 650 003
6,7 for veh. as of approx. Oct. 93
913 082 601 001
Description
Mounting parts incl. item 2 and 5
Support, long version
Reinforcement, long version
Supports, reinforcement
Detachable towbar
313 082 691 111 - 002
GB
13