Inventum RR410 Mode D'emploi page 14

2
before first use
Follow these instructions when using the window cleaner for the first time: Carefully unpack the window cleaner and all
accessories and remove all packaging and any promotional stickers. Keep the packaging (plastic bags and cardboard) out of
the reach of children. After unpacking the appliance, check it for external damage that may have occurred during transport.
Place the glass cleaner on a sturdy, dry and flat surface.
3
assembly
Explanation:
1 refers to a drawing number
3
refers to a number in the drawing
The following components can be found in the packaging 1:
1. Microfibre cloth (2x)
2. Holder - microfibre cloth
3. Coupling piece
4. Spray head
5. Spray bottle
6. Charger with cable
7. Indicator light
8. Connection for charger
9. Squeegee attachment
10. On/off switch
11. Basis - window cleaner
12. Collection reservoir
ASSEMBLY
2 Attach the squeegee attachment to the basis of the window cleaner and make sure you can hear it click.
Unscrew the spray head 2 from the spray bottle 1.
3
Place the holder for the microfibre cloth over the spray head 3.
Click the coupling piece 4 to the holder via the bottom side of the spray head, so that the spray head is clamped
between the holder and the coupling piece.
Attach the microfibre cloth 1 to the holder 2 and fasten it using the velcro.
4
5 Put some cleaning agent 1 in the bottle 2 and make up with water 3. Place the spray head with wiper 4 on the bottle and
screw tight 5.
CHARGING THE WINDOW CLEANER
6 Plug the charger 1 in a socket and plug the cable in the connection point 2 of the basis of the window cleaner.
Instruction: during charging, the indicator light will flash. Once the appliance is fully charged, the indicator light will burn
continuously. Always remove the charger from the socket once the appliance is charged.
4
using the window cleaner
7 Use 1 the spray bottle to spray cleaning agent evenly on the surface to be cleaned 2. Use the microfibre cloth 3 to
remove stubborn dirt. If necessary, wet the microfibre cloth under the tap.
8 Press the on/off switch
rubbers of the squeegee are clean before you start.
Move the window cleaner from top to bottom to suck up the cleaning agent and clean your windows without leaving any
streaks.
Instruction: hard to reach places can be cleaned (to a certain extent) with a vertical or horizontal movement.
Instruction: if the battery is almost empty, the indicator light will flash slowly. After a period of time the appliance will
switch off completely once the battery is empty. Charge the battery.
9 Press the on/off switch
in order to extend the time that the battery can be used.
Cleaning windows, mirrors or tiles is also possible without using the spray bottle. Clean your windows in the usual way and
use the window cleaner to suck up the cleaning agent and clean your windows without leaving any streaks.
14
• English
to switch on the window cleaner. The indicator light switches on. Caution: make sure the
to switch off the window cleaner. Always switch off the appliance when spraying a surface,