RENPHO RF-BMF01 Mode D'emploi page 7

BUTTONS
Short press to confirm the measurement and send to
the app via Bluetooth
Long press to zero the measurement
Short press to power on
Long press to power off
Short press to switch between inch and centimeter
Long press to switch between length and circumference
NOTE:
• Under length mode, do not insert the locking pin into
the tape receptacle for circumference mode.
• Under circumference mode, insert the locking pin into
the tape receptacle for circumference mode.
• The difference value between the circumference and
length measurement is 2.1cm / 0.84in, since the locking
pin needs to be inserted into the tape receptacle for
circumference mode while measuring the circumference.
Save measurement button
On/Off button
Unit button
EN-05
in
For Circumference Mode
in
For Length Mode