Ledvance LINK RDORKlT7BS030UNHD8SC814BLE Manuel D'utilisation page 4

WWW.LEDVANCEUS.COM
Optional Sensor Installation
The luminaires are shipped with a
plate that covers the sensor hole
(Fig. 7). The plate can be removed
either before or after you install
the fixture in the ceiling.
Install the sensor by snapping it
into the slot. Ensure it is securely
fixed (Fig. 10).
Fixture Bluetooth Control
The LEDVANCE LINK TM mobile application can be downloaded from the App Store or GooglePIay.
using the optional wireless wall switch. Please refer to the LEDVANCE LINK TM commissioning
mported by
LEDVANCE
4303007
1100 TyronePike
Versailles,KY40383
There
terminal
plate (Fig. 8).
The fixture
Figure 10 controlled using the LEDVANCE
LINKTMmobile application
(available in the App Store or
GooglePlay) and/or the optional
wireless
One sensor can be configured to
control up to 100 fixtures using the
Group and Linkage function —
refer to the LEDVANCE
commissionig guide.
mporté par
LEDVANCE
5450 ExplorerDrive
Mississauga, Ontario L4W5N1
is a flexible flat cable with a
secured to the back of the
and the sensor are
wall switch.
LINKTM
a 1-800-LIGHTBULB (1-800-544-4828)
ledvanceUS.com (US& Canada)
LEDVANCE isa registered trademark
LEOVANCE est unemarque déposée
4
Remove the flat cable
secured to the back of the plate
and insert the connector
back of the optional sensor 65785
(Fig. 9).
The fixtures can also be controlled
guide available at www.LEDVANCEUS.com.
LEDVANCE
that was
into the