Before Installing - Ledvance Link Rdorklt7Bs030Unhd8Sc814Ble Manuel D'utilisation

WWW.LEDVANCEUS.COM
Safety Precautions
IMPORTANT:
READ CAREFULLY BEFORE
GENERAL:
Upon receipt of the fixture, thoroughly inspect for any freight damage which should be brought to the attention of the delivery carrier.
Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply.
Turn off the power when you perform any maintenance.
Verify that supply voltage is correct by comparing it with the luminaire label information.
All wiring connections should be capped with UL approved wire connectors.
Avoid direct eye exposure to the light source while it is on.
Account for small parts and destroy packing material, as these may be hazardous to children.
Risk of burn. Disconnect power and allow fixture to cool before handling it.
Troubleshooting Checklist
Check your power source.
Check electrical connections.
Components:
A: End Plates
B: Side
C:Door Assembly
D:Self-tapping
mported by
LEDVANCE
4303007 1100 TyronePike
Versailles,KY40383
INSTALLING THE FIXTURE.
D
c
Plates
body
screws
mporté par
LEDVANCE
5450 ExplorerDrive
Mississauga, OntarioL4W 5N1
RETAIN FOR FUTURE
2pcs
2pcs
Ipc
4pcs
a 1-800-LIGHTBULB (1-800-544-4828)
w,uv ledvanceUS.com (US& Canada)
LEDVANCE isa registered trademark.
LEOVANCE est unemarque déposée
2
REFERENCE.
LEDVANCE