Rotel RICECOOKER1422 Mode D'emploi page 28

CLEANING
Take out the pot and the inside cover, wash them with water and wipe dry.
o
Take off the water storing tube, empty it, wash and reset it.
o
Wipe the outside of the pot and clean it soft cloth.
o
Do not use steel scourer or other coarse or abrasive cleaners to clean the pot. These
o
will damage the surface.
In case that rice grain or the other stains may be attached to the heating plate, 320#
o
sand paper is used to rub them away. Then wipe the heating plate clean with soft
cloth to ensure full contact between the pot and the heating plate.
PROBLEMS AND
Symptom
Heating plate is
Power indicator not hot
does not
illuminate Heating plate is
hot
Power indicator Heating plate is
illuminate not hot
Rice is not ripe or the cooking time
is too long
Rice is scotched
Cannot keep warm automatically
DISPOSAL
o For proper disposal, the unit is to return to the dealer,
company Rotel AG.
Gebrauchsanweisung o Mode d'emploi o Istruzioni per I'uso o Instruction for use
CAUSES
Cause
Not connect with power
The connections
1
loose
2 The indicator is damaged
3 The connections
Electric heating tube has been
4
burn
5 The pot has been deformed
6 The heating plate has been
deformed
The pot slants, absorbing
heating inefficiently
There are stains between
pot and the heating plate
The cooking button or lever
9
linkage does not work well
O Alnico thermal
Alnico thermal
Solutions
Checkthe switch/ plug/ outlet fuse&
cord and see whether they do work
well or not
inside are
Join them together again
Replacethem
are loose
Faster them again
3
4 Replace the heating tube
Adjust the pot to ensure a full
5
contact with the heating plate
Use sand paper to polish for
slight deform; send away to
replace if it is seriously deformed
Rotate the pot slightly to ensure
the
full contact
8 Use 320 sand
9 Clear burn with pinchers
Replace Alnico thermal limitation
limitation fails
O
stat fails Replacethe thermal stat
the service agent or the
ratel
swiss selection
aper to clean