End Signal - Aeg Tr86Cbc87 Notice D'utilisation

Time Dry on Wool programme
Option applicable to Wool programme to
adjust final dryness level to more dry or less
dry.
8.3 + Anti Crease
Extends up to 120 minutes the anti-crease
phase (30 minutes) at the end of the drying
cycle. After drying phase drum rotates from
time to time to prevent creases. Laundry can
be removed during the anti-crease phase.
8.4 Silent
The appliance operates with low noise
without effect on the drying quality. The
appliance operates slowly with longer cycle
time.

8.5 End Signal

The acoustic signal sounds at the following:
• cycle end
• start and end of crease guard phase
The acoustic signal is by default always on.
You can use this option to activate or
deactivate the sound.
8.6 Finish In
This option allows choosing the time at
which a programme should terminate.
Once activated the machine waits for the
right moment to begin the drying process.
Finish In time is the sum of stand by time and
drying time.
8.7 Favourite programmes
These selector positions are available after
the appliance have been connected to Wi-Fi.
The favourite programmes can be set and
saved via App only choosing from the
available ones which are divided into the
three categories indicated on the control
panel.
Once the favourite programmes have been
set, you can select one of them via App or by
turning the programme dial to relevant
position: the relevant led comes on and the
information on the display are updated
accordingly.
The favourite programmes can be
cancelled through the related App
command or pressing the Factory Default
key combination.
8.8 SyncDry function
This feature lets your tumble dryer to
automatically set the most appropriate
programme that matches the last washing
programme recently executed. All you need
to do is start the drying programme once your
tumble dryer is loaded. No other programme
settings or options are required on the tumble
dryer.
Once the washing programme has come to
an end, the washing machine transfers the
programme data via the home router Wi-Fi to
the cloud, as well as to your tumble dryer.
In order to use the SyncDry function, the
AEG tumble dryer and washing machine
must be connected to the same home
network and paired with our app.
To activate the function:
1. Once the wash cycle has come to an end,
place the clean laundry in the tumble
dryer.
2. Touch SyncDry button.
3. All display symbols will stay lighted off
except Wi-Fi icon and ProSense bars
that run an animation for a few seconds
as the appliance is retrieving data from
the cloud.
4. Display will update itself automatically
with the suggested programme. After 10
seconds, if data retrieving is
unsuccessful, the button LED is switched
off and the machine gives an acoustic
error signal. Then previously selected
programme is restored.
5. Touch Start/Pause button to begin drying
process.
ENGLISH 53