Main Functions; Wireless Technology - Cosmo Connected COSMO bike Guide Utilisateur

MAIN FUNCTIONS

Indicator lights / Fall detection and warning lights* / Position lights / Deceleration
lights**.
These light modes can be manually enabled/disabled via the mobile app and/or via the
remote control (optional accessory).
* The use of warning lights is regulated in each country; you must observe the laws in effect.
** The "deceleration" light mode is not enabled when the Cosmo Bike is attached to a helmet for visual
comfort.

WIRELESS TECHNOLOGY

The Cosmo Bike is equipped with a Bluetooth 4.0 transmitter-receiver. (Low energy).
Transmitter power: -8.4 dBm/frequency bandwidth: 2400 to 2483.5
EIRP maximum = -8.4 dBm.
BATTERY
The Cosmo Bike is equipped with a 900 mAh battery that can be recharged with a 5 V
micro-USB (included). A fully charged battery lasts around 220 minutes (3 hr 40 min.). The
battery autonomy is 8 hours with continuous lighting (may vary based on the use).
PRECAUTIONS REGARDING THE BUILT IN BATTERY
• Do not attempt to replace the battery in your Cosmo Bike. It is built in and cannot
be replaced.
• Charge the battery in accordance with the instructions provided in this guide
• Only use the charger that comes with your product to charge the battery
• Charge your Cosmo Bike using a computer, a powered docking station or certified
power station
• Do not attempt to open the built-in battery.
RECHARGING YOUR COSMO BIKE
Charge your Cosmo Bike with the micro-USB cable provided. A LED indicator will light up
to indicate it is charging and will turn off when fully charged. Check the battery level using
the Cosmo Bike app.
ATTACHING YOUR COSMO BIKE ("HELMET" OR "SEAT" MODE)
A brochure explaining the different ways to attach it is provided in the Cosmo Bike
packaging.