Before The First Use; Mobile App - Cosmo Connected COSMO bike Guide Utilisateur

Cosmo Bike by Cosmo Connected is a removable light that can be attached to
a helmet or a bike seat and connected to a mobile application. The functions
include position lighting (continuous), indicator lights, warning lights and decele-
ration lights when installed under the seat. The device associates visual safety,
fall detection and emergency warnings (via SMS and/or email).
MINIMAL SETUP REQUIRED
Cosmo Bike adapts to most bike helmets available on the market.
To be able to enjoy all the features, you must have a next generation smartphone such as:
IOS (Apple): Version 10 or higher
Android: Version 5 or higher
IOS & Android: GSM + GPS + Bluetooth smart 4 SIM
ON/OFF
Once charged, you can begin using your Cosmo Bike. To turn it on, you just tap the end of
the case twice. To turn it off, you do the same or use the app.

BEFORE THE FIRST USE

1. Plug your Cosmo Bike in using the micro-USB cable that comes with it. The Cosmo turns
on and gradually turns off. The recharge indicator LED (red light on the left side) stays on
until fully charged.
2. Unplug and then activate (tap the side twice: The Cosmo turns on)

MOBILE APP

1. Download the app from the Apple Store or Google Play Store and then start the app*
2. Go to the "my Cosmo" menu to select your device (Note: only connects through the app;
not through the phone Bluetooth settings).
3. Once the device has connected, an update is suggested. Accept the update.
4. Set up the desired attachment mode ("helmet" or "seat")
* Once installed, open the Cosmo Bike app and follow the instructions to create an account.
If you already have one, enter your ID and password to log in. You can also create an account at our
site cosmoconnected.com. The Cosmo Connected app is free as is creating an account where you
can add 3 emergency contacts to be notified by SMS and/or email if an incident is detected by
your Cosmo Bike.