Safety Instructions - Aeg Bd41B Notice D'utilisation

Masquer les pouces Voir aussi pour BD41B:
Table des Matières
Les langues disponibles

Les langues disponibles

• Disconnect the appliance
from the power supply be­
fore carrying out any main­
tenance.
• If the supply cord is dam­
aged, it must be replaced
by the manufacturer, its au­
thorised service centre or
similarly qualified persons
to avoid an electrical haz­
ard.
• WARNING: Ensure that the
appliance is switched off
before replacing the lamp
to avoid the possibility of
electric shock.
• WARNING: The appliance
and its accessible parts be­
come hot during use. Care
should be taken to avoid
touching heating elements

SAFETY INSTRUCTIONS

Installation
WARNING!
Only a qualified person must install this
appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Follow the installation instructions
available on our website.
• Be careful when moving the appliance, as
it is heavy. Use safety gloves and
enclosed footwear.
• Do not pull the appliance by the handle.
• Install the appliance in a safe and suitable
location that meets installation
requirements.
• Keep the minimum distance from other
appliances and units.
or the surface of the appli­
ance cavity.
• Always use oven gloves to
remove or insert accesso­
ries or ovenware.
• To remove the shelf sup­
ports first pull the front of
the shelf support and then
the rear end away from the
side walls. Install the shelf
supports in the opposite
sequence.
• Do not use a steam clean­
er to clean the appliance.
• Do not use harsh abrasive
cleaners or sharp metal
scrapers to clean the glass
door since they can scratch
the surface, which may re­
sult in shattering of the
glass.
• Before mounting the appliance, ensure it
is level and that the door opens without
any restraint.
• The appliance is equipped with an electric
cooling system. It must be operated with
the electric power supply.
Electrical connection
WARNING!
Risk of fire and electric shock.
• All electrical connections should be made
by a qualified electrician.
• Make sure the parameters on the rating
plate are compatible with the electrical
ratings of the mains power supply.
• The appliance must be earthed. Always
use a correctly installed shockproof
socket.
• Do not use multi-plug adapters and
extension cables.
ENGLISH
15
Table des Matières
loading

Table des Matières